FiTech 30005 Easy Street 600HP EFI System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.

Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30005 specifications.
| Item | Manufacturer listing |
|---|---|
| FiTech model | 30005 |
| Manufacturer maximum power | 600 HP |
| Mounting flange | 4-barrel square bore |
| ECU included | Yes |
| Throttle-body finish | Gold |
| Fuel pump included in listed base kit | No |
| Timing control, manufacturer listing | No |
| Power-adder compatible, manufacturer listing | No |
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Customer harness wire reference
The FiTech 30005 installation instructions, pages 5–6, identify the customer harness by wire colour rather than numbered connector cavity. This does not document every ECU terminal. Check the exact ignition diagram and harness revision.
| Wire or connection | Manufacturer-described function |
|---|---|
| Large red | Battery supply |
| White | Switched ignition-on and cranking supply |
| Large orange | Fuel pump positive supply |
| Blue | Engine speed reference |
| Black | Optional A/C input when grounded |
| Yellow | Fan 1 relay control |
| Yellow/black lead | Coolant temperature sensor; separate lead |
| Oxygen-sensor cable | Wideband oxygen-sensor harness |