Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
ThunderMax standalone motorcycle ECUs
Applies to
ThunderMax standalone motorcycle ECUs
Tool groups
None
Manufacturers
None

ThunderMax 309-562 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Manufacturer illustration of the ThunderMax 309-562 kit
Manufacturer illustration of the ThunderMax 309-562 kit. Image: ThunderMax manufacturer product listing, reproduced with permission.

Application and identification

2014–2016 Harley-Davidson Touring and Touring Trike models with throttle-by-wire; the product listing identifies air- and twin-cooled applications. Manufacturer source.

Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.

Control and installation

ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.

Connector information

This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.