Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
ThunderMax standalone motorcycle ECUs
Applies to
ThunderMax standalone motorcycle ECUs
Tool groups
None
Manufacturers
None

ThunderMax 309-466 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Manufacturer illustration of the ThunderMax 309-466 kit
Manufacturer illustration of the ThunderMax 309-466 kit. Image: ThunderMax manufacturer product listing, reproduced with permission.

Application and identification

Harley-Davidson V-Rod models: the product page lists 2002–2017, while the manufacturer document index describes the 309-466 guide as 2002–2014. Manufacturer source.

The two manufacturer listings differ on the end year. Verify the exact year, connector and kit with ThunderMax before installation.

Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.

Control and installation

ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.

Connector information

This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.