Removed text is struck through; added text is highlighted.
BossECU BMW M3.3 is an application-specific standalone ECU sold by BossGarage for the original engine wiring harness. The manufacturer’s product page describes it as a plug-and-play replacement; confirm the donor engine, original ECU family, connector and vehicle equipment before choosing it.
The manufacturer uses this BMW M3.1 photograph across the M3.1, M3.3 and M5.2 listings; it is a family illustration and connector details can differ. Image: BossGarage, reproduced with permission.
Manufacturer-listed applications
The combinations below are those named by BossGarage. Engine swaps, regional variants and changes to the original wiring can change compatibility. A vehicle model alone does not establish the original ECU or connector type.
BossGarage describes TunerStudio real-time tuning, VE-based fuel maps up to 32 × 32, an integrated controller for an LSU 4.9 wideband sensor, launch and boost control, and optional electronic-throttle hardware. It lists 14 analogue inputs and 24 low-side outputs on this product page; availability at the vehicle connector and the assignment of functions must be checked against the actual build and configuration. Wideband sensor, throttle hardware and other accessories may require additional components and wiring.
Connector and wiring
The manufacturer’s sales listing identifies the matching original harness but does not provide a complete cavity-by-cavity connector schedule. No model-specific pinout has been verified for this page. Do not infer every signal assignment from another BossECU, a superficially similar connector or the factory ECU: obtain the exact model and hardware revision wiring information from BossGarage before wiring or testing.
Documentation
BossECU BMW M3.3 product and application information; BossGarage plug-and-play range. See the BossECU manufacturer index.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: BossECU BMW M3.3
BossECU BMW M3.3 is an application-specific standalone ECU sold by BossGarage for the original engine wiring harness. The manufacturer’s product page describes it as a plug-and-play replacement; confirm the donor engine, original ECU family, connector and vehicle equipment before choosing it.
The manufacturer uses this BMW M3.1 photograph across the M3.1, M3.3 and M5.2 listings; it is a family illustration and connector details can differ. Image: BossGarage, reproduced with permission.
Manufacturer-listed applications
The combinations below are those named by BossGarage. Engine swaps, regional variants and changes to the original wiring can change compatibility. A vehicle model alone does not establish the original ECU or connector type.
BossGarage describes TunerStudio real-time tuning, VE-based fuel maps up to 32 × 32, an integrated controller for an LSU 4.9 wideband sensor, launch and boost control, and optional electronic-throttle hardware. It lists 14 analogue inputs and 24 low-side outputs on this product page; availability at the vehicle connector and the assignment of functions must be checked against the actual build and configuration. Wideband sensor, throttle hardware and other accessories may require additional components and wiring.
Connector and wiring
The manufacturer’s sales listing identifies the matching original harness but does not provide a complete cavity-by-cavity connector schedule. No model-specific pinout has been verified for this page. Do not infer every signal assignment from another BossECU, a superficially similar connector or the factory ECU: obtain the exact model and hardware revision wiring information from BossGarage before wiring or testing.
BossECU BMW M3.3 is an application-specific standalone ECU sold by BossGarage for the original engine wiring harness. The manufacturer’s product page describes it as a plug-and-play replacement; confirm the donor engine, original ECU family, connector and vehicle equipment before choosing it.
The manufacturer uses this BMW M3.1 photograph across the M3.1, M3.3 and M5.2 listings; it is a family illustration and connector details can differ. Image: BossGarage, reproduced with permission.
Manufacturer-listed applications
The combinations below are those named by BossGarage. Engine swaps, regional variants and changes to the original wiring can change compatibility. A vehicle model alone does not establish the original ECU or connector type.
BossGarage describes TunerStudio real-time tuning, VE-based fuel maps up to 32 × 32, an integrated controller for an LSU 4.9 wideband sensor, launch and boost control, and optional electronic-throttle hardware. It lists 14 analogue inputs and 24 low-side outputs on this product page; availability at the vehicle connector and the assignment of functions must be checked against the actual build and configuration. Wideband sensor, throttle hardware and other accessories may require additional components and wiring.
Connector and wiring
The manufacturer’s sales listing identifies the matching original harness but does not provide a complete cavity-by-cavity connector schedule. No model-specific pinout has been verified for this page. Do not infer every signal assignment from another BossECU, a superficially similar connector or the factory ECU: obtain the exact model and hardware revision wiring information from BossGarage before wiring or testing.