BossECU BMW M3.3 is an application-specific standalone ECU sold by BossGarage for the original engine wiring harness. The manufacturer’s product page describes it as a plug-and-play replacement; confirm the donor engine, original ECU family, connector and vehicle equipment before choosing it.

Manufacturer-listed applications
The combinations below are those named by BossGarage. Engine swaps, regional variants and changes to the original wiring can change compatibility. A vehicle model alone does not establish the original ECU or connector type.
| Engine / original ECU | Manufacturer-listed application |
|---|---|
| M50B20TU | 1992–96 E34 520i; 1992–94 E36 320i |
| M50B25TU | 1992–96 E34 525i; 1993–95 E36 325i |
| M60B30 | 1992–94 E32 730i; 1992–95 E34 530i; 1994–96 E38 730i |
| M60B40 | 1992–96 E31 840i; 1992–94 E32 740i; 1993–95 E34 540i; 1994–96 E38 740i |
Control and setup
BossGarage describes TunerStudio real-time tuning, VE-based fuel maps up to 32 × 32, an integrated controller for an LSU 4.9 wideband sensor, launch and boost control, and optional electronic-throttle hardware. It lists 14 analogue inputs and 24 low-side outputs on this product page; availability at the vehicle connector and the assignment of functions must be checked against the actual build and configuration. Wideband sensor, throttle hardware and other accessories may require additional components and wiring.
Connector and wiring
The manufacturer’s sales listing identifies the matching original harness but does not provide a complete cavity-by-cavity connector schedule. No model-specific pinout has been verified for this page. Do not infer every signal assignment from another BossECU, a superficially similar connector or the factory ECU: obtain the exact model and hardware revision wiring information from BossGarage before wiring or testing.
Documentation
BossECU BMW M3.3 product and application information; BossGarage plug-and-play range. See the BossECU manufacturer index.