FAST laptop-tunable XFI Street fuel ECU for naturally aspirated engines.
Identification and functions
FAST describes XFI Street as a fuel-delivery ECU using EZ-EFI Fuel hardware and harnessing, with C-Com tuning and laptop-connected data logging. It states that the system is intended for naturally aspirated engines. The 304001 kit includes a four-injector throttle body and harness; 304003 is a retrofit for an existing EZ-EFI installation. The manufacturer describes wiring compatibility with EZ-EFI Fuel; do not infer EZ-EFI 2.0 or XFI 2.0 connector compatibility. Use the exact product's installation instructions and verify ignition control scope for the configured system.
Wiring and support
Identify ECU part number, software version, harness and engine before connecting inputs or outputs. Exact pin functions depend on the specific unit, harness and optional drivers. FAST's software and documentation index separates its families. A missing pinout is not evidence that a related system uses the same connector.
See the FAST manufacturer index. Sources reviewed 17 November 2026.
Compatible original EZ-EFI harness reference
FAST states that the 304003 XFI Street retrofit uses the same wiring and plugs into the EZ-EFI Fuel harness: see the FAST product description. The table below transcribes the original EZ-EFI 30227 harness drawing in FAST instructions FAST4-152, page 33. These are the harness drawing’s labels, not an independently verified XFI Street internal I/O schedule; check the actual harness and Street documentation for functions, options and revisions before wiring. CAN pins 2 and 3 are labelled in the drawing but no harness wire is shown.
| ECU pin | Signal | Harness wire colour |
|---|---|---|
| 1 | Injector A | Black |
| 2 | CAN L | Not shown |
| 3 | CAN H | Not shown |
| 4 | 12 V switched | Pink |
| 5 | MAP | White/violet |
| 6 | CTS | White |
| 7 | ATS | White/pink |
| 8 | TPS | White/red |
| 9 | O2 Ip / P+ | Red |
| 10 | Power ground | Black |
| 11 | N/A | — |
| 12 | RPM input | Yellow |
| 13 | O2 Vs/Ip / S+ | Yellow |
| 14 | O2 Rcal / P− | Green |
| 15 | IAC A-LO | Blue |
| 16 | IAC A-HI | Red |
| 17 | IAC B-HI | Yellow |
| 18 | Injector D | Green |
| 19 | Injector B | Brown |
| 20 | Fan | Blue |
| 21 | PC TXD | Red |
| 22 | PC RXD | Black |
| 23 | Analog ground | Black/pink |
| 24 | O2 H− / H− | White |
| 25 | PC RTN | White |
| 26 | Fuel pump | Light green |
| 27 | A/C input | Gray |
| 28 | Power ground | Black |
| 29 | O2 Vs / R+ | Black |
| 30 | N/A | — |
| 31 | Battery | Red |
| 32 | 5 V reference | Red/white |
| 33 | N/A | — |
| 34 | N/A | — |
| 35 | IAC B-LO | Black |
| 36 | Injector C | Yellow |
