Link G4+ Monsoon is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; guide lists four analogue voltage inputs and two temperature inputs. Its injection channels are not available as spare switching outputs in the guide. Link G4+ Monsoon quick-start guide.
Model identification and I/O
| Item | Documented details |
|---|---|
| ECU family | G4+ |
| Outputs | 4 injection and 4 ignition drives |
| Programming | PCLink version matched to ECU generation and firmware |
| Connector and loom | See the exact-model guide, including connector keys, wire-side orientation and optional functions |
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Monsoon quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.
34-position A connector
Link’s G4+ Monsoon quick-start guide, page 3, shows these assignments and colours when looking into the wire side of the loom connector, or into the ECU header. Numbering follows its four-row G4+ diagram. Confirm the actual loom and generation before wiring; this is not the later MonsoonX schedule.
| Pin | Function | Wire colour |
|---|---|---|
| A1 | Inj 4 | Brown/orange |
| A2 | Inj 3 | Brown/red |
| A3 | Inj 2 | Brown |
| A4 | Inj 1 | Brown/black |
| A5 | +14 V | Red |
| A6 | DI 4 | Red/white |
| A7 | Shield/ground | Green |
| A8 | Trigger 1 | Black |
| A9 | Trigger 2 | Red |
| A10 | Ignition 4 | Blue/orange |
| A11 | Ignition 3 | Blue/red |
| A12 | Ignition 2 | Blue/brown |
| A13 | Ignition 1 | Blue |
| A14 | Analog volt 4 | White/black |
| A15 | Temperature 1 | Yellow |
| A16 | Temperature 2 | Yellow/brown |
| A17 | Analog volt 1 | Yellow/blue |
| A18 | Auxiliary 4 | Orange |
| A19 | Auxiliary 3 | Orange/red |
| A20 | Auxiliary 2 | Orange/brown |
| A21 | Auxiliary 1 | Orange/black |
| A22 | Analog volt 2 | White/brown |
| A23 | DI 3 | Grey/red |
| A24 | Ground out | Green |
| A25 | Ground | Black |
| A26 | Auxiliary 6 | Orange/purple |
| A27 | Auxiliary 5 | Orange/blue |
| A28 | CAN high | Orange/green |
| A29 | CAN low | Orange/yellow |
| A30 | DI 1 | Grey/black |
| A31 | DI 2 | Grey/brown |
| A32 | +5 V | Red/blue |
| A33 | Analog volt 3 | Yellow/black |
| A34 | Ground | Black |