Page organisation in this revision
- Page type
- Technical article
- Subject
- ABS / DSC
- Parent
- Happy Cactus MK60 Companion ABS converter
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Happy Cactus Garage
Changes from revision 3 to revision 3
Removed text is struck through; added text is highlighted.
Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.
Model-specific connections
For the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.
The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.
Applications
See the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: Happy Cactus MK60 Companion retrofit wiring guide
Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.
Model-specific connections
For the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.
The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.
Applications
See the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.
Revision 3: Happy Cactus MK60 Companion retrofit wiring guide
Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.
Model-specific connections
For the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.
The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.
Applications
See the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.