Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
Happy Cactus Garage ABS interfaces
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Happy Cactus Garage

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.Model-specific connectionsFor the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.ApplicationsSee the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.The Happy Cactus Garage MK60 ABS VR/Hall Converter interfaces wheel-speed and vehicle signals with compatible MK60-family units; it does not replace the ABS hydraulic controller. The supplier lists selected BMW E46 and Mini R50/R52/R53 MK60 units, BMW E8x/E9x MK60E1 and MK60E5 units, and warns that compatibility depends on sensor type and tone ring. Supplier product details.Documented retrofit applicationsThe supplier lists examples including BMW E30/E36 and Mazda MX-5 NA/NB factory-ABS vehicles using VR sensors, and MX-5 NC/ND and Subaru BRZ/Toyota GR86 using Hall sensors. These are claimed aftermarket integration candidates, not factory fitments of this module or proof that every trim works. Verify sensors and tone-ring details for each vehicle. Manufacturer vehicle list and limits.Connector referenceMK60 Converter grey and black connector pinouts are sourced from the supplier-linked setup guide and scoped to this interface.

Page organisation changed

FieldRevision 2Revision 3
Page typeReference hubTechnical article
SubjectABS / DSCABS / DSC
ParentHappy Cactus Garage ABS interfacesHappy Cactus MK60 Companion ABS converter
Applies toNo ECU-specific applicabilityNo ECU-specific applicability
Tool groupsNoneNone
Vehicle makesHappy Cactus GarageHappy Cactus Garage

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Happy Cactus Garage MK60 ABS VR Hall Converter

The Happy Cactus Garage MK60 ABS VR/Hall Converter interfaces wheel-speed and vehicle signals with compatible MK60-family units; it does not replace the ABS hydraulic controller. The supplier lists selected BMW E46 and Mini R50/R52/R53 MK60 units, BMW E8x/E9x MK60E1 and MK60E5 units, and warns that compatibility depends on sensor type and tone ring. Supplier product details.

Documented retrofit applications

The supplier lists examples including BMW E30/E36 and Mazda MX-5 NA/NB factory-ABS vehicles using VR sensors, and MX-5 NC/ND and Subaru BRZ/Toyota GR86 using Hall sensors. These are claimed aftermarket integration candidates, not factory fitments of this module or proof that every trim works. Verify sensors and tone-ring details for each vehicle. Manufacturer vehicle list and limits.

Connector reference

MK60 Converter grey and black connector pinouts are sourced from the supplier-linked setup guide and scoped to this interface.

Revision 3: Happy Cactus MK60 Companion retrofit wiring guide

Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.

Model-specific connections

For the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.

The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.

Applications

See the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.