Page organisation in this revision
- Page type
- Reference hub
- Subject
- ABS / DSC
- Parent
- Happy Cactus Garage ABS interfaces
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Happy Cactus Garage
Changes from revision 1 to revision 3
Removed text is struck through; added text is highlighted.
Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.Model-specific connectionsFor the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.ApplicationsSee the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.The Happy Cactus Garage MK60 ABS VR/Hall Converter interfaces wheel-speed and vehicle signals with compatible MK60-family units; it does not replace the ABS hydraulic controller. The supplier lists selected BMW E46 and Mini R50/R52/R53 MK60 units, BMW E8x/E9x MK60E1 and MK60E5 units, and warns that compatibility depends on sensor type and tone ring. Supplier product details.Documented retrofit applicationsThe supplier lists examples including BMW E30/E36 and Mazda MX-5 NA/NB factory-ABS vehicles using VR sensors, and MX-5 NC/ND and Subaru BRZ/Toyota GR86 using Hall sensors. These are claimed aftermarket integration candidates, not factory fitments of this module or proof that every trim works. Verify sensors and tone-ring details for each vehicle. Manufacturer vehicle list and limits.
Page organisation changed
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Happy Cactus Garage MK60 ABS VR Hall Converter
The Happy Cactus Garage MK60 ABS VR/Hall Converter interfaces wheel-speed and vehicle signals with compatible MK60-family units; it does not replace the ABS hydraulic controller. The supplier lists selected BMW E46 and Mini R50/R52/R53 MK60 units, BMW E8x/E9x MK60E1 and MK60E5 units, and warns that compatibility depends on sensor type and tone ring. Supplier product details.
Documented retrofit applications
The supplier lists examples including BMW E30/E36 and Mazda MX-5 NA/NB factory-ABS vehicles using VR sensors, and MX-5 NC/ND and Subaru BRZ/Toyota GR86 using Hall sensors. These are claimed aftermarket integration candidates, not factory fitments of this module or proof that every trim works. Verify sensors and tone-ring details for each vehicle. Manufacturer vehicle list and limits.
Revision 3: Happy Cactus MK60 Companion retrofit wiring guide
Integration reference for the Happy Cactus MK60 Companion; the interface conditions sensors and vehicle signals for a separate MK60-family hydraulic ABS controller.
Model-specific connections
For the converter’s grey connector, the supplier documents differences between MK60 and MK60E1/E5 for the brake-switch signal, switched ignition and CAN high positions. The connector pinout and controller cross-reference lists the positions. These refer to the supplier’s retrofit configuration and are not a general pinout for every production ABS unit.
The chassis connector accepts a brake-light signal, while the grey ABS-side brake output connects only to the ABS brake-switch input. The speed output is 5 V PWM and the fault-lamp output works with MK60E1/E5. Check the exact application and sensor type. Supplier-linked wiring guide.
Applications
See the separate supplier-listed vehicle and sensor applications and verify the actual tone ring and ABS unit.