Removed text is struck through; added text is highlighted.
Land Rover diesel tuning starts with the exact vehicle, engine and controller. A Td5, a 2.2 TD4 and a modern mild-hybrid diesel do not share a universal map, access method or emissions system. This guide brings together documented examples and a practical validation workflow; it is not a list of interchangeable calibrations.
Identify the vehicle before choosing a file
Record the VIN, model and market, model year, engine code, transmission, ECU hardware and software numbers, existing modifications and emissions equipment. Check the ECU label and diagnostic identification against the tool provider's current vehicle and protocol list. A badge, engine size or outwardly similar ECU is not enough to establish compatibility. Record the original software identification and keep a verified recoverable read where the chosen tool and protocol support it; a partial calibration read is not necessarily a complete ECU recovery image.
Documented exampleWhat matters for tuningEvidence
Discovery Series II Td5The factory training manual describes electronic unit injectors driven by the camshaft, rather than common-rail injection. The ECU uses individual injector calibration codes. Identify the fitted controller and the vehicle configuration before choosing a file.Land Rover Discovery Series II Td5 training manual
Discovery Sport 2015 2.2 TD4 AWDOne Alientech application list records engine 224DT with Bosch EDC17CP42. This is a specific listed example, not a rule for every TD4 or Discovery Sport.Alientech K-Suite application list (PDF mirror)
Selected 2.0 D165 and D200 mild hybrids, 2021 onwardsAlientech lists Bosch MD1CP017 on specified Discovery Sport, Range Rover Evoque and Velar applications. Its October 2026 KESS3 release describes a BOOT unlock followed by BENCH access for the protected units covered by that protocol. Check the exact ECU, tool version, licence and lock state; do not assume OBD access.Alientech KESS3 protocol release; Bosch MD1CP017 referenceDocumented exampleWhat matters for tuningEvidence
Discovery Series II Td5The factory training manual describes electronic unit injectors driven by the camshaft, rather than common-rail injection. The ECU uses individual injector calibration codes. Identify the fitted controller and the vehicle configuration before choosing a file.Land Rover Discovery Series II Td5 training manual
Discovery Sport 2015 2.2 TD4 AWDOne Alientech application list records engine 224DT with Bosch EDC17CP42. This is a specific listed example, not a rule for every TD4 or Discovery Sport.Alientech Powergate application list
Selected 2.0 D165 and D200 mild hybrids, 2021 onwardsAlientech lists Bosch MD1CP017 on specified Discovery Sport, Range Rover Evoque and Velar applications. Its October 2026 KESS3 release describes a BOOT unlock followed by BENCH access for the protected units covered by that protocol. Check the exact ECU, tool version, licence and lock state; do not assume OBD access.Alientech KESS3 protocol release; Bosch MD1CP017 referenceFor mechanically governed injection pumps, EDC identification and common hardware changes on earlier engines, see the 200Tdi and 300Tdi tuning guide.
Td5: ECU type, injectors and calibration
Nanocom distinguishes earlier non-flash-programmable Td5 ECUs with MSB part-number prefixes from later flash-programmable NNN units. The prefix is a starting point, not proof that a particular file or procedure is correct. MSB tuning may require physical memory work; NNN programming options depend on the tool and the actual ECU. Confirm part number, installed hardware, vehicle variant and software before writing. Nanocom: Lucas Td5 diagnostic information; BPS Garage: examples of MSB chip and NNN services.
The Td5 manual describes coded electronic unit injectors. If an injector is replaced or moved, use the applicable service procedure to check and enter the correct code for its cylinder; record existing values before work. A replacement ECU can also require vehicle-specific configuration and immobiliser synchronisation. Land Rover's Discovery II bulletin discusses correct ECU replacement and security-code relearn on non-start cases. Do not copy injector codes or a complete ECU image from another vehicle without establishing compatibility. Td5 training manual; Land Rover bulletin LT303-002.
For a detailed discussion of Td5 demand, smoke, torque and duration maps, boost control, hardware upgrades and validation, see the Land Rover Td5 tuning guide.
For the classic Defender Puma engines, see the 2.4 and 2.2 TDCi tuning guide for ECU identification, maps, hardware and testing.What a calibration needs to account for
Diesel output depends on the interaction of requested torque, permitted fuel quantity, available air, injection timing, boost control and temperature or component protections. Names, units and map structures vary by ECU and software. Bosch's motorsport diesel ECU documentation illustrates separate smoke and torque limits and temperature-dependent corrections; it does not establish addresses, values or map definitions for any Land Rover production ECU. Use definitions verified against the exact software and review the whole torque and air system instead of applying a uniform percentage to tables. Bosch Motorsport MS 25 Sport manual.
Extra fuel needs sufficient air and appropriate injection control. More boost is not automatically safer or more powerful: charge temperature, compressor operating range, turbine back-pressure and turbo speed matter. Retain the protective functions and the original emissions strategy. A larger intercooler or turbo also needs a calibration matched to the actual hardware, not a file selected only by a stage number. Garrett: choosing a turbocharger; Garrett: turbo system optimisation.
Workshop workflow and validation
Establish a baseline. Read and record fault codes and relevant live data before clearing anything. Resolve existing fuelling, cooling, boost, exhaust and emissions faults; inspect hoses, charge-air leaks and service condition. Check the vehicle's actual transmission and driveline condition and intended use, especially towing or sustained load.
Plan recovery. Identify the supported read/write and recovery procedure, use a suitable stable power supply as directed by the tool, and save the original read and identifiers. Verify checksums and file compatibility with the selected tool; do not assume a successful read includes all security or configuration data.
Measure before and after. Under comparable, controlled conditions, record requested and actual boost, available air and fuel-related values, temperatures, fault status and, where fitted and supported, rail pressure and DPF data. Log exhaust temperature, turbine pressure or turbo speed only when suitable instrumentation is available. Compare like-for-like dyno runs or appropriately controlled road logs and assess response as well as peak output. Garrett recommends charge-system leak checks and instrumented evaluation as part of turbo optimisation.
Check the finished vehicle. Review cold and warm operation, transient response, smoke, fault codes, regeneration behaviour where applicable, and transmission behaviour. Investigate discrepancies between requested and measured values. Avoid claiming a fixed gain or universal safe boost or exhaust-temperature limit: these depend on the exact engine, sensors, hardware and duty cycle.
On vehicles with a diesel particulate filter, follow the handbook and diagnose failed regeneration rather than masking the fault. Land Rover's maintenance guidance explains that the particular vehicle covered may need a drive at normal operating temperature to complete regeneration; the correct procedure and warning response must be checked for the specific model. Land Rover: DPF maintenance example. Garrett cautions that production variable-turbine actuator settings are calibrated; avoid altering them as a substitute for diagnosis. Garrett replacement FAQs.
Road use and emissions
Keep the manufacturer's applicable emissions equipment functional and assess compliance for the vehicle and jurisdiction. The UK MOT manual classifies missing, obviously modified or obviously defective manufacturer-fitted emissions control equipment, and evidence of DPF tampering, as major defects. The DVSA states that a vehicle built with a DPF fails the MOT if it is missing. An MOT pass alone is not proof that a modified calibration complies with every road-use requirement. DVSA MOT inspection manual, section 8; DVSA catalytic converters and DPF guidance.
Related pages
See Land Rover engine failures and common problems for sourced timing-drive, crankshaft and Ingenium issues and service checks.See the Range Rover 3.6 and 4.4 TDV8 tuning guide for ECU maps, upgrades and validation.See the Freelander 2.0 TD4 and 2.2 TD4/SD4 tuning guide for ECU maps, upgrades and validation.See the Discovery 2.7 TDV6 and 3.0 TDV6/SDV6 tuning guide for ECU maps, upgrades and validation.Land Rover aftermarket tuners and specialists.Classic Defender models and engines; Discovery generations and engines; Freelander generations and engines.Land Rover diagnostics and Jaguar and Land Rover diagnostics.DPF differential pressure sensors and tuning boxes and pedal boxes.Classic Defender models and engines; Discovery generations and engines; Freelander generations and engines.Land Rover diagnostics and Jaguar and Land Rover diagnostics.DPF differential pressure sensors and tuning boxes and pedal boxes.
Open each version to inspect formatting, tables and photographs.
Revision 3: Land Rover diesel tuning and ECU identification
Land Rover diesel tuning starts with the exact vehicle, engine and controller. A Td5, a 2.2 TD4 and a modern mild-hybrid diesel do not share a universal map, access method or emissions system. This guide brings together documented examples and a practical validation workflow; it is not a list of interchangeable calibrations.
Identify the vehicle before choosing a file
Record the VIN, model and market, model year, engine code, transmission, ECU hardware and software numbers, existing modifications and emissions equipment. Check the ECU label and diagnostic identification against the tool provider's current vehicle and protocol list. A badge, engine size or outwardly similar ECU is not enough to establish compatibility. Record the original software identification and keep a verified recoverable read where the chosen tool and protocol support it; a partial calibration read is not necessarily a complete ECU recovery image.
| Documented example | What matters for tuning | Evidence |
| Discovery Series II Td5 | The factory training manual describes electronic unit injectors driven by the camshaft, rather than common-rail injection. The ECU uses individual injector calibration codes. Identify the fitted controller and the vehicle configuration before choosing a file. | Land Rover Discovery Series II Td5 training manual |
| Discovery Sport 2015 2.2 TD4 AWD | One Alientech application list records engine 224DT with Bosch EDC17CP42. This is a specific listed example, not a rule for every TD4 or Discovery Sport. | Alientech Powergate application list |
| Selected 2.0 D165 and D200 mild hybrids, 2021 onwards | Alientech lists Bosch MD1CP017 on specified Discovery Sport, Range Rover Evoque and Velar applications. Its October 2026 KESS3 release describes a BOOT unlock followed by BENCH access for the protected units covered by that protocol. Check the exact ECU, tool version, licence and lock state; do not assume OBD access. | Alientech KESS3 protocol release; Bosch MD1CP017 reference |
For mechanically governed injection pumps, EDC identification and common hardware changes on earlier engines, see the 200Tdi and 300Tdi tuning guide.
Td5: ECU type, injectors and calibration
Nanocom distinguishes earlier non-flash-programmable Td5 ECUs with MSB part-number prefixes from later flash-programmable NNN units. The prefix is a starting point, not proof that a particular file or procedure is correct. MSB tuning may require physical memory work; NNN programming options depend on the tool and the actual ECU. Confirm part number, installed hardware, vehicle variant and software before writing. Nanocom: Lucas Td5 diagnostic information; BPS Garage: examples of MSB chip and NNN services.
The Td5 manual describes coded electronic unit injectors. If an injector is replaced or moved, use the applicable service procedure to check and enter the correct code for its cylinder; record existing values before work. A replacement ECU can also require vehicle-specific configuration and immobiliser synchronisation. Land Rover's Discovery II bulletin discusses correct ECU replacement and security-code relearn on non-start cases. Do not copy injector codes or a complete ECU image from another vehicle without establishing compatibility. Td5 training manual; Land Rover bulletin LT303-002.
For a detailed discussion of Td5 demand, smoke, torque and duration maps, boost control, hardware upgrades and validation, see the Land Rover Td5 tuning guide.
What a calibration needs to account for
Diesel output depends on the interaction of requested torque, permitted fuel quantity, available air, injection timing, boost control and temperature or component protections. Names, units and map structures vary by ECU and software. Bosch's motorsport diesel ECU documentation illustrates separate smoke and torque limits and temperature-dependent corrections; it does not establish addresses, values or map definitions for any Land Rover production ECU. Use definitions verified against the exact software and review the whole torque and air system instead of applying a uniform percentage to tables. Bosch Motorsport MS 25 Sport manual.
Extra fuel needs sufficient air and appropriate injection control. More boost is not automatically safer or more powerful: charge temperature, compressor operating range, turbine back-pressure and turbo speed matter. Retain the protective functions and the original emissions strategy. A larger intercooler or turbo also needs a calibration matched to the actual hardware, not a file selected only by a stage number. Garrett: choosing a turbocharger; Garrett: turbo system optimisation.
Workshop workflow and validation
- Establish a baseline. Read and record fault codes and relevant live data before clearing anything. Resolve existing fuelling, cooling, boost, exhaust and emissions faults; inspect hoses, charge-air leaks and service condition. Check the vehicle's actual transmission and driveline condition and intended use, especially towing or sustained load.
- Plan recovery. Identify the supported read/write and recovery procedure, use a suitable stable power supply as directed by the tool, and save the original read and identifiers. Verify checksums and file compatibility with the selected tool; do not assume a successful read includes all security or configuration data.
- Measure before and after. Under comparable, controlled conditions, record requested and actual boost, available air and fuel-related values, temperatures, fault status and, where fitted and supported, rail pressure and DPF data. Log exhaust temperature, turbine pressure or turbo speed only when suitable instrumentation is available. Compare like-for-like dyno runs or appropriately controlled road logs and assess response as well as peak output. Garrett recommends charge-system leak checks and instrumented evaluation as part of turbo optimisation.
- Check the finished vehicle. Review cold and warm operation, transient response, smoke, fault codes, regeneration behaviour where applicable, and transmission behaviour. Investigate discrepancies between requested and measured values. Avoid claiming a fixed gain or universal safe boost or exhaust-temperature limit: these depend on the exact engine, sensors, hardware and duty cycle.
On vehicles with a diesel particulate filter, follow the handbook and diagnose failed regeneration rather than masking the fault. Land Rover's maintenance guidance explains that the particular vehicle covered may need a drive at normal operating temperature to complete regeneration; the correct procedure and warning response must be checked for the specific model. Land Rover: DPF maintenance example. Garrett cautions that production variable-turbine actuator settings are calibrated; avoid altering them as a substitute for diagnosis. Garrett replacement FAQs.
Road use and emissions
Keep the manufacturer's applicable emissions equipment functional and assess compliance for the vehicle and jurisdiction. The UK MOT manual classifies missing, obviously modified or obviously defective manufacturer-fitted emissions control equipment, and evidence of DPF tampering, as major defects. The DVSA states that a vehicle built with a DPF fails the MOT if it is missing. An MOT pass alone is not proof that a modified calibration complies with every road-use requirement. DVSA MOT inspection manual, section 8; DVSA catalytic converters and DPF guidance.
Related pages
Revision 10: Land Rover diesel tuning and ECU identification
Land Rover diesel tuning starts with the exact vehicle, engine and controller. A Td5, a 2.2 TD4 and a modern mild-hybrid diesel do not share a universal map, access method or emissions system. This guide brings together documented examples and a practical validation workflow; it is not a list of interchangeable calibrations.
Identify the vehicle before choosing a file
Record the VIN, model and market, model year, engine code, transmission, ECU hardware and software numbers, existing modifications and emissions equipment. Check the ECU label and diagnostic identification against the tool provider's current vehicle and protocol list. A badge, engine size or outwardly similar ECU is not enough to establish compatibility. Record the original software identification and keep a verified recoverable read where the chosen tool and protocol support it; a partial calibration read is not necessarily a complete ECU recovery image.
| Documented example | What matters for tuning | Evidence |
| Discovery Series II Td5 | The factory training manual describes electronic unit injectors driven by the camshaft, rather than common-rail injection. The ECU uses individual injector calibration codes. Identify the fitted controller and the vehicle configuration before choosing a file. | Land Rover Discovery Series II Td5 training manual |
| Discovery Sport 2015 2.2 TD4 AWD | One Alientech application list records engine 224DT with Bosch EDC17CP42. This is a specific listed example, not a rule for every TD4 or Discovery Sport. | Alientech K-Suite application list (PDF mirror) |
| Selected 2.0 D165 and D200 mild hybrids, 2021 onwards | Alientech lists Bosch MD1CP017 on specified Discovery Sport, Range Rover Evoque and Velar applications. Its October 2026 KESS3 release describes a BOOT unlock followed by BENCH access for the protected units covered by that protocol. Check the exact ECU, tool version, licence and lock state; do not assume OBD access. | Alientech KESS3 protocol release; Bosch MD1CP017 reference |
For mechanically governed injection pumps, EDC identification and common hardware changes on earlier engines, see the 200Tdi and 300Tdi tuning guide.
Td5: ECU type, injectors and calibration
Nanocom distinguishes earlier non-flash-programmable Td5 ECUs with MSB part-number prefixes from later flash-programmable NNN units. The prefix is a starting point, not proof that a particular file or procedure is correct. MSB tuning may require physical memory work; NNN programming options depend on the tool and the actual ECU. Confirm part number, installed hardware, vehicle variant and software before writing. Nanocom: Lucas Td5 diagnostic information; BPS Garage: examples of MSB chip and NNN services.
The Td5 manual describes coded electronic unit injectors. If an injector is replaced or moved, use the applicable service procedure to check and enter the correct code for its cylinder; record existing values before work. A replacement ECU can also require vehicle-specific configuration and immobiliser synchronisation. Land Rover's Discovery II bulletin discusses correct ECU replacement and security-code relearn on non-start cases. Do not copy injector codes or a complete ECU image from another vehicle without establishing compatibility. Td5 training manual; Land Rover bulletin LT303-002.
For a detailed discussion of Td5 demand, smoke, torque and duration maps, boost control, hardware upgrades and validation, see the Land Rover Td5 tuning guide.
For the classic Defender Puma engines, see the 2.4 and 2.2 TDCi tuning guide for ECU identification, maps, hardware and testing.
What a calibration needs to account for
Diesel output depends on the interaction of requested torque, permitted fuel quantity, available air, injection timing, boost control and temperature or component protections. Names, units and map structures vary by ECU and software. Bosch's motorsport diesel ECU documentation illustrates separate smoke and torque limits and temperature-dependent corrections; it does not establish addresses, values or map definitions for any Land Rover production ECU. Use definitions verified against the exact software and review the whole torque and air system instead of applying a uniform percentage to tables. Bosch Motorsport MS 25 Sport manual.
Extra fuel needs sufficient air and appropriate injection control. More boost is not automatically safer or more powerful: charge temperature, compressor operating range, turbine back-pressure and turbo speed matter. Retain the protective functions and the original emissions strategy. A larger intercooler or turbo also needs a calibration matched to the actual hardware, not a file selected only by a stage number. Garrett: choosing a turbocharger; Garrett: turbo system optimisation.
Workshop workflow and validation
- Establish a baseline. Read and record fault codes and relevant live data before clearing anything. Resolve existing fuelling, cooling, boost, exhaust and emissions faults; inspect hoses, charge-air leaks and service condition. Check the vehicle's actual transmission and driveline condition and intended use, especially towing or sustained load.
- Plan recovery. Identify the supported read/write and recovery procedure, use a suitable stable power supply as directed by the tool, and save the original read and identifiers. Verify checksums and file compatibility with the selected tool; do not assume a successful read includes all security or configuration data.
- Measure before and after. Under comparable, controlled conditions, record requested and actual boost, available air and fuel-related values, temperatures, fault status and, where fitted and supported, rail pressure and DPF data. Log exhaust temperature, turbine pressure or turbo speed only when suitable instrumentation is available. Compare like-for-like dyno runs or appropriately controlled road logs and assess response as well as peak output. Garrett recommends charge-system leak checks and instrumented evaluation as part of turbo optimisation.
- Check the finished vehicle. Review cold and warm operation, transient response, smoke, fault codes, regeneration behaviour where applicable, and transmission behaviour. Investigate discrepancies between requested and measured values. Avoid claiming a fixed gain or universal safe boost or exhaust-temperature limit: these depend on the exact engine, sensors, hardware and duty cycle.
On vehicles with a diesel particulate filter, follow the handbook and diagnose failed regeneration rather than masking the fault. Land Rover's maintenance guidance explains that the particular vehicle covered may need a drive at normal operating temperature to complete regeneration; the correct procedure and warning response must be checked for the specific model. Land Rover: DPF maintenance example. Garrett cautions that production variable-turbine actuator settings are calibrated; avoid altering them as a substitute for diagnosis. Garrett replacement FAQs.
Road use and emissions
Keep the manufacturer's applicable emissions equipment functional and assess compliance for the vehicle and jurisdiction. The UK MOT manual classifies missing, obviously modified or obviously defective manufacturer-fitted emissions control equipment, and evidence of DPF tampering, as major defects. The DVSA states that a vehicle built with a DPF fails the MOT if it is missing. An MOT pass alone is not proof that a modified calibration complies with every road-use requirement. DVSA MOT inspection manual, section 8; DVSA catalytic converters and DPF guidance.
Related pages
See Land Rover engine failures and common problems for sourced timing-drive, crankshaft and Ingenium issues and service checks.
See the Range Rover 3.6 and 4.4 TDV8 tuning guide for ECU maps, upgrades and validation.
See the Freelander 2.0 TD4 and 2.2 TD4/SD4 tuning guide for ECU maps, upgrades and validation.
See the Discovery 2.7 TDV6 and 3.0 TDV6/SDV6 tuning guide for ECU maps, upgrades and validation.