Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Gearboxes
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Dodge, Fiat

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

The C635 six-speed dual-dry-clutch transmission (DDCT) was fitted to some Fiat 500L and Dodge Dart models. It is a different application from Fiat 500 single-clutch Dualogic and from the manually shifted C635: identify the gearbox, engine, market, VIN and sales code before using a procedure. FCA's 2014 500L bulletin identifies the DDCT as sales code DA1; Dodge's 2014 Dart specifications also identify the optional 1.4-litre transmission as C635 DDCT. FCA bulletin 18-020-14; Dodge 2014 Dart specifications.

Fiat 500L: delayed or unavailable gear selection

US recall P06 / NHTSA 14V-103: on certain 2014 500L vehicles with the six-speed DDCT, the gear shift module (GSM) could lose communication with the transaxle. Moving the lever could fail to select the requested gear or have a delayed effect, including an inability to leave Park; unexpected directional movement could result. The historical remedy checks GSM software and, according to the result, updates or replaces the GSM or requires no further action. This is a shifter-module issue and does not establish that a clutch or the transmission control module (TCM) has failed. Check the individual VIN and campaign completion with the manufacturer. Chrysler P06 dealer instructions.US recall P06 / NHTSA 14V-103: on certain 2014 500L vehicles with the six-speed DDCT, the gear shift module (GSM) could lose communication with the transaxle. Moving the lever could fail to select the requested gear or have a delayed effect, including an inability to leave Park; unexpected directional movement could result. The historical remedy checks GSM software and, according to the result, updates or replaces the GSM. This is a shifter-module issue and does not establish that a clutch or the transmission control module (TCM) has failed. Check the individual VIN and campaign completion with the manufacturer. Chrysler P06 dealer instructions.

Workshop caution: those instructions require the GSM assembly to be at least 60 °F (15.5 °C) before its software is interrogated or programmed, because doing so at a lower temperature can permanently damage it. Use the current manufacturer procedure and tools for the specific vehicle; do not improvise a flash from an old bulletin. Chrysler P06 dealer instructions.

Fiat 500L: shift refinement and engine response

FCA bulletin 18-020-14 / RRT 14-029 describes a separate 2014 500L DA1 software action for customers wanting more refined gear selection. Its historical procedure first records and repairs engine-system faults, then selectively updates the TCM, body control module and instrument cluster and performs the stated transmission relearn. It is not a diagnosis for every harsh shift, nor the P06 shifter recall. Confirm the VIN, build and present software applicability against current manufacturer information; the bulletin's printed build year contains a typographical error, so do not rely on that date alone. FCA bulletin 18-020-14.

US recall T19 / NHTSA 17V-192 is a different condition affecting certain 2014 500L vehicles with the 1.4-litre EAM engine. Incorrect powertrain control module (PCM) calibration could limit the engine to idle speed and torque despite accelerator input, reducing acceleration or the ability to maintain speed. The historical remedy updates PCM software. Treat apparent loss of drive as a powertrain diagnosis and check this recall by VIN rather than assuming a gearbox fault; its applicability is not limited here to DDCT vehicles. FCA T19 dealer instructions.

Dodge Dart: unexpected neutral and TCM mounting

US recall R42 / NHTSA 15V-542: certain 2013–2015 Dart vehicles with the 1.4-litre EAF engine and DA1 DDCT could have TCM solder joints separate as a result of the mounting bracket, causing an open circuit and an uncommanded shift to neutral. This can cause loss of motive power without warning. FCA's historical recall remedy replaces both the TCM and its bracket. Check VIN and completion status; do not extrapolate this Dart-specific bracket failure or remedy to a 500L simply because the transmissions share a designation. FCA R42 dealer instructions; FCA investigation chronology.

Diagnostic approach

Record the exact symptom, selected and displayed gear, operating conditions, warnings and whether the engine speed responds. If gear selection or vehicle movement is unpredictable, secure the vehicle and arrange recovery.Check VIN-specific campaigns and their completion in the vehicle's market. The US examples above do not establish applicability in other markets.Before clearing faults, record codes and relevant data from the engine, transmission, shifter and other accessible modules. Compare the requested gear with the displayed result and investigate communication, power and ground faults using the correct wiring and manufacturer tests.Check current software and service history against the specific bulletin and follow its prerequisites. Complete adaptations only when specified for the vehicle and repair; a reset cannot establish the cause of a fault.

See also Fiat Dualogic faults and diagnostics and Alfa Romeo MiTo C633 TCT operation and diagnosis.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Fiat C635 dual dry clutch faults and diagnostics

The C635 six-speed dual-dry-clutch transmission (DDCT) was fitted to some Fiat 500L and Dodge Dart models. It is a different application from Fiat 500 single-clutch Dualogic and from the manually shifted C635: identify the gearbox, engine, market, VIN and sales code before using a procedure. FCA's 2014 500L bulletin identifies the DDCT as sales code DA1; Dodge's 2014 Dart specifications also identify the optional 1.4-litre transmission as C635 DDCT. FCA bulletin 18-020-14; Dodge 2014 Dart specifications.

Fiat 500L: delayed or unavailable gear selection

US recall P06 / NHTSA 14V-103: on certain 2014 500L vehicles with the six-speed DDCT, the gear shift module (GSM) could lose communication with the transaxle. Moving the lever could fail to select the requested gear or have a delayed effect, including an inability to leave Park; unexpected directional movement could result. The historical remedy checks GSM software and, according to the result, updates or replaces the GSM. This is a shifter-module issue and does not establish that a clutch or the transmission control module (TCM) has failed. Check the individual VIN and campaign completion with the manufacturer. Chrysler P06 dealer instructions.

Workshop caution: those instructions require the GSM assembly to be at least 60 °F (15.5 °C) before its software is interrogated or programmed, because doing so at a lower temperature can permanently damage it. Use the current manufacturer procedure and tools for the specific vehicle; do not improvise a flash from an old bulletin. Chrysler P06 dealer instructions.

Fiat 500L: shift refinement and engine response

FCA bulletin 18-020-14 / RRT 14-029 describes a separate 2014 500L DA1 software action for customers wanting more refined gear selection. Its historical procedure first records and repairs engine-system faults, then selectively updates the TCM, body control module and instrument cluster and performs the stated transmission relearn. It is not a diagnosis for every harsh shift, nor the P06 shifter recall. Confirm the VIN, build and present software applicability against current manufacturer information; the bulletin's printed build year contains a typographical error, so do not rely on that date alone. FCA bulletin 18-020-14.

US recall T19 / NHTSA 17V-192 is a different condition affecting certain 2014 500L vehicles with the 1.4-litre EAM engine. Incorrect powertrain control module (PCM) calibration could limit the engine to idle speed and torque despite accelerator input, reducing acceleration or the ability to maintain speed. The historical remedy updates PCM software. Treat apparent loss of drive as a powertrain diagnosis and check this recall by VIN rather than assuming a gearbox fault; its applicability is not limited here to DDCT vehicles. FCA T19 dealer instructions.

Dodge Dart: unexpected neutral and TCM mounting

US recall R42 / NHTSA 15V-542: certain 2013–2015 Dart vehicles with the 1.4-litre EAF engine and DA1 DDCT could have TCM solder joints separate as a result of the mounting bracket, causing an open circuit and an uncommanded shift to neutral. This can cause loss of motive power without warning. FCA's historical recall remedy replaces both the TCM and its bracket. Check VIN and completion status; do not extrapolate this Dart-specific bracket failure or remedy to a 500L simply because the transmissions share a designation. FCA R42 dealer instructions; FCA investigation chronology.

Diagnostic approach

  1. Record the exact symptom, selected and displayed gear, operating conditions, warnings and whether the engine speed responds. If gear selection or vehicle movement is unpredictable, secure the vehicle and arrange recovery.
  2. Check VIN-specific campaigns and their completion in the vehicle's market. The US examples above do not establish applicability in other markets.
  3. Before clearing faults, record codes and relevant data from the engine, transmission, shifter and other accessible modules. Compare the requested gear with the displayed result and investigate communication, power and ground faults using the correct wiring and manufacturer tests.
  4. Check current software and service history against the specific bulletin and follow its prerequisites. Complete adaptations only when specified for the vehicle and repair; a reset cannot establish the cause of a fault.

See also Fiat Dualogic faults and diagnostics and Alfa Romeo MiTo C633 TCT operation and diagnosis.

Revision 2: Fiat C635 dual dry clutch faults and diagnostics

The C635 six-speed dual-dry-clutch transmission (DDCT) was fitted to some Fiat 500L and Dodge Dart models. It is a different application from Fiat 500 single-clutch Dualogic and from the manually shifted C635: identify the gearbox, engine, market, VIN and sales code before using a procedure. FCA's 2014 500L bulletin identifies the DDCT as sales code DA1; Dodge's 2014 Dart specifications also identify the optional 1.4-litre transmission as C635 DDCT. FCA bulletin 18-020-14; Dodge 2014 Dart specifications.

Fiat 500L: delayed or unavailable gear selection

US recall P06 / NHTSA 14V-103: on certain 2014 500L vehicles with the six-speed DDCT, the gear shift module (GSM) could lose communication with the transaxle. Moving the lever could fail to select the requested gear or have a delayed effect, including an inability to leave Park; unexpected directional movement could result. The historical remedy checks GSM software and, according to the result, updates or replaces the GSM or requires no further action. This is a shifter-module issue and does not establish that a clutch or the transmission control module (TCM) has failed. Check the individual VIN and campaign completion with the manufacturer. Chrysler P06 dealer instructions.

Workshop caution: those instructions require the GSM assembly to be at least 60 °F (15.5 °C) before its software is interrogated or programmed, because doing so at a lower temperature can permanently damage it. Use the current manufacturer procedure and tools for the specific vehicle; do not improvise a flash from an old bulletin. Chrysler P06 dealer instructions.

Fiat 500L: shift refinement and engine response

FCA bulletin 18-020-14 / RRT 14-029 describes a separate 2014 500L DA1 software action for customers wanting more refined gear selection. Its historical procedure first records and repairs engine-system faults, then selectively updates the TCM, body control module and instrument cluster and performs the stated transmission relearn. It is not a diagnosis for every harsh shift, nor the P06 shifter recall. Confirm the VIN, build and present software applicability against current manufacturer information; the bulletin's printed build year contains a typographical error, so do not rely on that date alone. FCA bulletin 18-020-14.

US recall T19 / NHTSA 17V-192 is a different condition affecting certain 2014 500L vehicles with the 1.4-litre EAM engine. Incorrect powertrain control module (PCM) calibration could limit the engine to idle speed and torque despite accelerator input, reducing acceleration or the ability to maintain speed. The historical remedy updates PCM software. Treat apparent loss of drive as a powertrain diagnosis and check this recall by VIN rather than assuming a gearbox fault; its applicability is not limited here to DDCT vehicles. FCA T19 dealer instructions.

Dodge Dart: unexpected neutral and TCM mounting

US recall R42 / NHTSA 15V-542: certain 2013–2015 Dart vehicles with the 1.4-litre EAF engine and DA1 DDCT could have TCM solder joints separate as a result of the mounting bracket, causing an open circuit and an uncommanded shift to neutral. This can cause loss of motive power without warning. FCA's historical recall remedy replaces both the TCM and its bracket. Check VIN and completion status; do not extrapolate this Dart-specific bracket failure or remedy to a 500L simply because the transmissions share a designation. FCA R42 dealer instructions; FCA investigation chronology.

Diagnostic approach

  1. Record the exact symptom, selected and displayed gear, operating conditions, warnings and whether the engine speed responds. If gear selection or vehicle movement is unpredictable, secure the vehicle and arrange recovery.
  2. Check VIN-specific campaigns and their completion in the vehicle's market. The US examples above do not establish applicability in other markets.
  3. Before clearing faults, record codes and relevant data from the engine, transmission, shifter and other accessible modules. Compare the requested gear with the displayed result and investigate communication, power and ground faults using the correct wiring and manufacturer tests.
  4. Check current software and service history against the specific bulletin and follow its prerequisites. Complete adaptations only when specified for the vehicle and repair; a reset cannot establish the cause of a fault.

See also Fiat Dualogic faults and diagnostics and Alfa Romeo MiTo C633 TCT operation and diagnosis.