Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- MBE Systems standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 3 to revision 3
Removed text is struck through; added text is highlighted.
The MBE 956E is a historic serial ECU with an SBD model-specific connector pinout. Check the full unit suffix and application when selecting a diagram. Source and identification.
Wiring and pinout
Model wiring documentation: SBD 956E pinout information. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.
Document identification discrepancy
Although the file is named MBE956E Pin Out Information, the first page is headed “CONNECTOR PIN OUT FOR 956-C ECU”. The filename alone does not establish that the 956-C wiring applies to a 956E. Confirm the exact unit and diagram with the supplier before wiring.
912/956 wiring harness interface
SBD’s separate 912–956 series wiring instructions identify a four-way Sure Seal harness interface; these are interface positions, not the numbered main ECU connector. Pins 1 and 2 receive battery positive through a relay as shown in the SBD diagram. The sheet describes a series harness rather than a validated 956E main-pin schedule. Identify the interface and harness before making connections.
Interface pinHarness colourFunction in SBD harness1PurpleBattery positive via relay2WhiteBattery positive via relay3GreyGearshift light earth trigger4GreenRev counter
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: MBE 956E
The MBE 956E is a historic serial ECU with an SBD model-specific connector pinout. Check the full unit suffix and application when selecting a diagram. Source and identification.
Wiring and pinout
Model wiring documentation: SBD 956E pinout information. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.
Document identification discrepancy
Although the file is named MBE956E Pin Out Information, the first page is headed “CONNECTOR PIN OUT FOR 956-C ECU”. The filename alone does not establish that the 956-C wiring applies to a 956E. Confirm the exact unit and diagram with the supplier before wiring.
912/956 wiring harness interface
SBD’s separate 912–956 series wiring instructions identify a four-way Sure Seal harness interface; these are interface positions, not the numbered main ECU connector. Pins 1 and 2 receive battery positive through a relay as shown in the SBD diagram. The sheet describes a series harness rather than a validated 956E main-pin schedule. Identify the interface and harness before making connections.
| Interface pin | Harness colour | Function in SBD harness |
|---|
| 1 | Purple | Battery positive via relay |
| 2 | White | Battery positive via relay |
| 3 | Grey | Gearshift light earth trigger |
| 4 | Green | Rev counter |
Revision 3: MBE 956E
The MBE 956E is a historic serial ECU with an SBD model-specific connector pinout. Check the full unit suffix and application when selecting a diagram. Source and identification.
Wiring and pinout
Model wiring documentation: SBD 956E pinout information. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.
Document identification discrepancy
Although the file is named MBE956E Pin Out Information, the first page is headed “CONNECTOR PIN OUT FOR 956-C ECU”. The filename alone does not establish that the 956-C wiring applies to a 956E. Confirm the exact unit and diagram with the supplier before wiring.
912/956 wiring harness interface
SBD’s separate 912–956 series wiring instructions identify a four-way Sure Seal harness interface; these are interface positions, not the numbered main ECU connector. Pins 1 and 2 receive battery positive through a relay as shown in the SBD diagram. The sheet describes a series harness rather than a validated 956E main-pin schedule. Identify the interface and harness before making connections.
| Interface pin | Harness colour | Function in SBD harness |
|---|
| 1 | Purple | Battery positive via relay |
| 2 | White | Battery positive via relay |
| 3 | Grey | Gearshift light earth trigger |
| 4 | Green | Rev counter |