Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- Link standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
Link G1 LinkPlus V10 is a documented G1 Link engine-management designation. Link lists LinkPlus V10 as a G1 ECU for legacy PCLink V2.5. A LinkPlus designation alone is insufficient to select software or wiring. Identification source.
Identification and software
Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.
Model-specific wiring
The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.
See Link standalone ECUs for related models and generation distinctions.
Generation and firing sequence
Link staff distinguish G1 and G2 LinkPlus wiring: G1 wiring uses firing sequence, while G2 channel numbering follows injector numbering. Verify the exact V10 manual, fuel mode, trigger configuration and firing sequence; do not treat a G2 schedule as a V10 cavity chart.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Link G1 LinkPlus V10
Link G1 LinkPlus V10 is a documented G1 Link engine-management designation. Link lists LinkPlus V10 as a G1 ECU for legacy PCLink V2.5. A LinkPlus designation alone is insufficient to select software or wiring. Identification source.
Identification and software
Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.
Model-specific wiring
The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.
See Link standalone ECUs for related models and generation distinctions.
Generation and firing sequence
Link staff distinguish G1 and G2 LinkPlus wiring: G1 wiring uses firing sequence, while G2 channel numbering follows injector numbering. Verify the exact V10 manual, fuel mode, trigger configuration and firing sequence; do not treat a G2 schedule as a V10 cavity chart.
Revision 2: Link G1 LinkPlus V10
Link G1 LinkPlus V10 is a documented G1 Link engine-management designation. Link lists LinkPlus V10 as a G1 ECU for legacy PCLink V2.5. A LinkPlus designation alone is insufficient to select software or wiring. Identification source.
Identification and software
Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.
Model-specific wiring
The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.
See Link standalone ECUs for related models and generation distinctions.
Generation and firing sequence
Link staff distinguish G1 and G2 LinkPlus wiring: G1 wiring uses firing sequence, while G2 channel numbering follows injector numbering. Verify the exact V10 manual, fuel mode, trigger configuration and firing sequence; do not treat a G2 schedule as a V10 cavity chart.