PodiumConnect/Micro connects a compatible CAN data system to local logging and the Podium service through a separately supplied Wi-Fi hotspot.

Specifications and operation
PodiumConnect/Micro is designed to connect an existing data system to Podium. The manufacturer documents one CAN 2.0 bus, software-controlled termination, local recording, and streaming through a supplied-by-user Wi-Fi hotspot; it is not the same as an integrated cellular modem. Its guide provides data-system integration instructions including AiM, MoTeC and VBOX. Check the precise source device, available broadcast channels, cable, GPS data and configuration. Its stated maximum telemetry sample rate is 10 Hz, while local logging can use different rates.
The manufacturer lists one CAN 2.0 interface, software-controlled termination, local SD logging and hotspot-based telemetry up to 10 Hz; a separate source supplies channels such as GPS. The local recording rate and transmitted update rate differ. Micro technical guide.
Pigtail pinout and wiring
| M8 four-pin pigtail | Signal |
|---|---|
| 1 | CAN low |
| 2 | Power, 9–24 V |
| 3 | CAN high |
| 4 | Ground |
These assignments are documented for the named male pigtail. Select the proper adapter and confirm the manufacturer drawing, cavity markings, cable colours and device generation before wiring. Match CAN bitrate, decoding and network termination.
The manufacturer lists an AiM Data Hub adapter and other model-specific leads. Wi-Fi access point mode alone is not a remote internet link; verify hotspot, account and service requirements. Micro installation.
See the Autosport Labs manufacturer guide.