Original FAST self-tuning fuel-injection system, distinguished from fuel-and-ignition EZ-EFI 2.0.
Identification and functions
The original EZ-EFI is a self-tuning fuel system. FAST explicitly describes it as fuel-only when contrasting it with EZ-EFI 2.0; a conventional distributor can retain its own timing control. Systems include throttle-body and multipoint variants. Use the manufacturer's EZ-EFI update and support information and the appropriate original-version manual; a compatible ECU replacement is not a universal pinout for every 2.0 product.
Wiring and support
Identify ECU part number, software version, harness and engine before connecting inputs or outputs. Exact pin functions depend on the specific unit, harness and optional drivers. FAST's software and documentation index separates its families. A missing pinout is not evidence that a related system uses the same connector.
See the FAST manufacturer index. Sources reviewed 17 November 2026.
Original EZ-EFI ECU connector
The FAST original EZ-EFI instructions, part FAST4-152, revised 19 April 2011, include wiring schematic 30227, revision A, on PDF page 33. The manufacturer labels 36 ECU positions as follows. CAN positions 2 and 3 are labeled but no harness wire is drawn for them in this schematic. Follow the original schematic and identify the harness before wiring; this schedule is distinct from EZ-EFI 2.0.
| ECU pin | Signal | Harness wire colour |
|---|---|---|
| 1 | Injector A | Black |
| 2 | CAN L | Not shown |
| 3 | CAN H | Not shown |
| 4 | 12 V switched | Pink |
| 5 | MAP | White/violet |
| 6 | CTS | White |
| 7 | ATS | White/pink |
| 8 | TPS | White/red |
| 9 | O2 Ip / P+ | Red |
| 10 | Power ground | Black |
| 11 | N/A | — |
| 12 | RPM input | Yellow |
| 13 | O2 Vs/Ip / S+ | Yellow |
| 14 | O2 Rcal / P− | Green |
| 15 | IAC A-LO | Blue |
| 16 | IAC A-HI | Red |
| 17 | IAC B-HI | Yellow |
| 18 | Injector D | Green |
| 19 | Injector B | Brown |
| 20 | Fan | Blue |
| 21 | PC TXD | Red |
| 22 | PC RXD | Black |
| 23 | Analog ground | Black/pink |
| 24 | O2 H− / H− | White |
| 25 | PC RTN | White |
| 26 | Fuel pump | Light green |
| 27 | A/C input | Gray |
| 28 | Power ground | Black |
| 29 | O2 Vs / R+ | Black |
| 30 | N/A | — |
| 31 | Battery | Red |
| 32 | 5 V reference | Red/white |
| 33 | N/A | — |
| 34 | N/A | — |
| 35 | IAC B-LO | Black |
| 36 | Injector C | Yellow |