Removed text is struck through; added text is highlighted.
Manufacturer product photograph: Cosworth. Permission to republish confirmed by the user.
Cosworth identifies the MQ12Di as its second-generation gasoline-direct-injection ECU, building on the earlier MQ12 plus external IDU1 solution. Its documented scope includes multiple-pulse GDI and combined port/direct fuelling up to eight cylinders, or sequential port injection up to twelve. Cosworth product information.
Identification and control
Cosworth lists integrated logging based on its Omega L2 platform, fly-by-wire and semi-automatic transmission control. Obtain the MQ12Di-specific connector and wiring documentation; do not apply MQ12 or SQ7Di pinouts. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.
Connectors and wiring
Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.
Software and support
Cosworth's Pectel application notes cover model-specific strategies; confirm toolchain and access level with the supplier. See the Cosworth Pectel and Antares family for related controllers.
Complete documented MQ12Di connector schedules
The following 209 positions are transcribed from Cosworth’s MQ12Di product information sheet, document 29E-501085-P, revision 1aE, pages 4–9, hosted by KMS Racing Engines. Connector colours and part numbers are as stated there. The signal designations are hardware functions; assignments and availability depend on configuration and build. GDI high-side and corresponding low-side drivers must be paired as described in the original. Consult that document for connector orientation, driver limits, supply and ground requirements, pull-ups, protection and all other electrical notes, and confirm the revision with Cosworth.
Open each version to inspect formatting, tables and photographs.
Revision 3: Cosworth MQ12DiManufacturer product photograph: Cosworth. Permission to republish confirmed by the user.
Cosworth identifies the MQ12Di as its second-generation gasoline-direct-injection ECU, building on the earlier MQ12 plus external IDU1 solution. Its documented scope includes multiple-pulse GDI and combined port/direct fuelling up to eight cylinders, or sequential port injection up to twelve. Cosworth product information.
Identification and control
Cosworth lists integrated logging based on its Omega L2 platform, fly-by-wire and semi-automatic transmission control. Obtain the MQ12Di-specific connector and wiring documentation; do not apply MQ12 or SQ7Di pinouts. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.
Connectors and wiring
Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.
The following 209 positions are transcribed from Cosworth’s MQ12Di product information sheet, document 29E-501085-P, revision 1aE, pages 4–9, hosted by KMS Racing Engines. Connector colours and part numbers are as stated there. The signal designations are hardware functions; assignments and availability depend on configuration and build. GDI high-side and corresponding low-side drivers must be paired as described in the original. Consult that document for connector orientation, driver limits, supply and ground requirements, pull-ups, protection and all other electrical notes, and confirm the revision with Cosworth.
Revision 3: Cosworth MQ12DiManufacturer product photograph: Cosworth. Permission to republish confirmed by the user.
Cosworth identifies the MQ12Di as its second-generation gasoline-direct-injection ECU, building on the earlier MQ12 plus external IDU1 solution. Its documented scope includes multiple-pulse GDI and combined port/direct fuelling up to eight cylinders, or sequential port injection up to twelve. Cosworth product information.
Identification and control
Cosworth lists integrated logging based on its Omega L2 platform, fly-by-wire and semi-automatic transmission control. Obtain the MQ12Di-specific connector and wiring documentation; do not apply MQ12 or SQ7Di pinouts. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.
Connectors and wiring
Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.
The following 209 positions are transcribed from Cosworth’s MQ12Di product information sheet, document 29E-501085-P, revision 1aE, pages 4–9, hosted by KMS Racing Engines. Connector colours and part numbers are as stated there. The signal designations are hardware functions; assignments and availability depend on configuration and build. GDI high-side and corresponding low-side drivers must be paired as described in the original. Consult that document for connector orientation, driver limits, supply and ground requirements, pull-ups, protection and all other electrical notes, and confirm the revision with Cosworth.