Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
RACELOGIC

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

VBOX Mini LapTimer is a compact position-based lap timer and data logger for installations with limited space. The following connector details are specifically from the RLVBLAPMINI-V1 datasheet; verify V2 units separately.

VBOX Mini LapTimer. Image: RACELOGIC; reproduced with permission; manufacturer product image.

Specifications

The V1 sheet specifies 10 Hz GNSS update rate, 7–30 V DC input, IP65 rating and dimensions 50 × 50 × 26.7 mm excluding connectors. It logs to removable memory media and supports predictive lap timing; kit contents and hardware version should be checked. RACELOGIC V1 datasheet; getting started.

V1 pinout and wiring

Original wiki functional schematic, not connector-face geometry. Based on RACELOGIC V1 datasheet.

The six-way Hirose power, CAN and serial connector for RLVBLAPMINI-V1 is listed as:

PinFunction1RS232 RX2RS232 TX3Ground4CAN low5CAN high6Power

The SMA GNSS antenna connection is separate. RACELOGIC lists the RLCAB165 Hirose-to-vehicle-power cable for its kit. Confirm model revision, connector view, correct harness and the vehicle's CAN compatibility before connection. V1 pinout and specifications.

See the RACELOGIC manufacturer guide.

Data analysis softwareCircuit Tools comparing simulator laps with traces, video and track map; shown is an earlier software interface and simulator data, not a recording made by the VBOX Mini LapTimer V1. Image: RACELOGIC, reproduced with permission; manufacturer image.Copy the recorded session from the memory card and open it in Circuit Tools to compare lap times, track position and speed traces. Video is available only when a compatible video recording is separately present. The manufacturer lists Circuit Tools for analysis of this product. Manufacturer product documentation.Download Circuit Tools from RACELOGIC. The manufacturer offers Windows, macOS and iOS editions; check the product, file and operating-system compatibility for the edition used. See the RACELOGIC manufacturer guide for analysis workflow and edition differences.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: RACELOGIC VBOX Mini LapTimer

VBOX Mini LapTimer is a compact position-based lap timer and data logger for installations with limited space. The following connector details are specifically from the RLVBLAPMINI-V1 datasheet; verify V2 units separately.

VBOX Mini LapTimer
VBOX Mini LapTimer. Image: RACELOGIC; reproduced with permission; manufacturer product image.

Specifications

The V1 sheet specifies 10 Hz GNSS update rate, 7–30 V DC input, IP65 rating and dimensions 50 × 50 × 26.7 mm excluding connectors. It logs to removable memory media and supports predictive lap timing; kit contents and hardware version should be checked. RACELOGIC V1 datasheet; getting started.

V1 pinout and wiring

VBOX Mini LapTimer V1 power and CAN schematic
Original wiki functional schematic, not connector-face geometry. Based on RACELOGIC V1 datasheet.

The six-way Hirose power, CAN and serial connector for RLVBLAPMINI-V1 is listed as:

PinFunction
1RS232 RX
2RS232 TX
3Ground
4CAN low
5CAN high
6Power

The SMA GNSS antenna connection is separate. RACELOGIC lists the RLCAB165 Hirose-to-vehicle-power cable for its kit. Confirm model revision, connector view, correct harness and the vehicle's CAN compatibility before connection. V1 pinout and specifications.

See the RACELOGIC manufacturer guide.

Revision 2: RACELOGIC VBOX Mini LapTimer

VBOX Mini LapTimer is a compact position-based lap timer and data logger for installations with limited space. The following connector details are specifically from the RLVBLAPMINI-V1 datasheet; verify V2 units separately.

VBOX Mini LapTimer
VBOX Mini LapTimer. Image: RACELOGIC; reproduced with permission; manufacturer product image.

Specifications

The V1 sheet specifies 10 Hz GNSS update rate, 7–30 V DC input, IP65 rating and dimensions 50 × 50 × 26.7 mm excluding connectors. It logs to removable memory media and supports predictive lap timing; kit contents and hardware version should be checked. RACELOGIC V1 datasheet; getting started.

V1 pinout and wiring

VBOX Mini LapTimer V1 power and CAN schematic
Original wiki functional schematic, not connector-face geometry. Based on RACELOGIC V1 datasheet.

The six-way Hirose power, CAN and serial connector for RLVBLAPMINI-V1 is listed as:

PinFunction
1RS232 RX
2RS232 TX
3Ground
4CAN low
5CAN high
6Power

The SMA GNSS antenna connection is separate. RACELOGIC lists the RLCAB165 Hirose-to-vehicle-power cable for its kit. Confirm model revision, connector view, correct harness and the vehicle's CAN compatibility before connection. V1 pinout and specifications.

See the RACELOGIC manufacturer guide.

Data analysis software

RACELOGIC Circuit Tools comparing laps with data traces and video
Circuit Tools comparing simulator laps with traces, video and track map; shown is an earlier software interface and simulator data, not a recording made by the VBOX Mini LapTimer V1. Image: RACELOGIC, reproduced with permission; manufacturer image.

Copy the recorded session from the memory card and open it in Circuit Tools to compare lap times, track position and speed traces. Video is available only when a compatible video recording is separately present. The manufacturer lists Circuit Tools for analysis of this product. Manufacturer product documentation.

Download Circuit Tools from RACELOGIC. The manufacturer offers Windows, macOS and iOS editions; check the product, file and operating-system compatibility for the edition used. See the RACELOGIC manufacturer guide for analysis workflow and edition differences.