VBOX Mini LapTimer is a compact position-based lap timer and data logger for installations with limited space. The following connector details are specifically from the RLVBLAPMINI-V1 datasheet; verify V2 units separately.

Specifications
The V1 sheet specifies 10 Hz GNSS update rate, 7–30 V DC input, IP65 rating and dimensions 50 × 50 × 26.7 mm excluding connectors. It logs to removable memory media and supports predictive lap timing; kit contents and hardware version should be checked. RACELOGIC V1 datasheet; getting started.
V1 pinout and wiring
The six-way Hirose power, CAN and serial connector for RLVBLAPMINI-V1 is listed as:
| Pin | Function |
|---|---|
| 1 | RS232 RX |
| 2 | RS232 TX |
| 3 | Ground |
| 4 | CAN low |
| 5 | CAN high |
| 6 | Power |
The SMA GNSS antenna connection is separate. RACELOGIC lists the RLCAB165 Hirose-to-vehicle-power cable for its kit. Confirm model revision, connector view, correct harness and the vehicle's CAN compatibility before connection. V1 pinout and specifications.
See the RACELOGIC manufacturer guide.