Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- Adaptronic standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 3 to revision 3
Removed text is struck through; added text is highlighted.
The Adaptronic eMod017 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Mazda MX-5 Miata NB8B and NB8C. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.
Application and installation
Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.
Model-specific pinout
In the eMod017 section of the manufacturer download archive, find: MX5_NB8B_C_Pinout.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: Basemap_NB8C_SE.ecu.
Documentation limits
Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.
MX-5 NB8B/NB8C connector assignments
From Adaptronic's MX5 NB8B/C pinout ZIP, preserved in the Haltech Adaptronic archive. The manufacturer sheet identifies the 2001–2005 naturally aspirated NB8B/C, the 2003–2005 NB8C-SE turbo and Australian 2001–2002 NB8B-SP turbo. Pin orientation is looking into the ECU; factory assignments and ECU functions can differ. See the sheet for factory functions, wire colours and vehicle-specific notes.
The sheet groups 2A–2AD as NC. It ends at 5AE, although the diagram also shows 5AF–5AH; these and other omitted positions remain unverified. Mod 1 and Mod 3 depend on the installed upgrade module. The manufacturer pinout includes a product photograph.
PinAdaptronic function1AMod 3 (depends on installed module)1BMod 1 (depends on installed module)1CNC1DMod 3 (depends on installed module)1EMod 1 (depends on installed module)1FNC1GMod 3 (depends on installed module)1HMod 1 (depends on installed module)1JMod 3 (depends on installed module)1KMod 1 (depends on installed module)1LNC1MMod 3 (depends on installed module)1NNC1ONC1QMod 1 (depends on installed module)1RNC1SMod 3 (depends on installed module)1TMod 1 (depends on installed module)1UNC1VNC2A–2ADNC (grouped range as stated by manufacturer)3AInjector output 13BIgnition output 5 (cooling fan)3CIgnition output 6 (condenser fan)3DInjector output 23ENC3FNC3GInjector output 33HNC3INC3JInjector output 43KIgnition output 7 (A/C relay)3MECCS/fuel pump control output3NAuxiliary output 2 (VTCS)3OECCS/fuel pump control output3P12 V power input3QAuxiliary output 1 (idle)3RAuxiliary output 4 (check lamp)4APower ground4BPower ground4CInjector output 64DAuxiliary output 34EIgnition output 34FIgnition output 1 (cylinders 1 and 4)4HECCS hardwired4IIgnition output 2 (cylinders 2 and 3)4JPower ground (front O2 heater)4KExternal 0–5 V input 24LIgnition output 44MAlternator control4NFuel pressure4OTachometer4PPower ground (rear O2 heater)4QCAS 34SNC4TVehicle speed input4UNC4VCAS 2 (cam)4WNC4XOil pressure4YCAS 1 (crank)4ZOil temperature5APower ground5BNC5CDigital input 3 (power steering)5DInverse of injector 8 (boost control)5EInverse of injector 8 (connected to 5D)5FDigital input 4 (A/C request)5HDigital input 2 (clutch)5IDigital input 1 (neutral)5JInjector output 5 (VTCS vacuum switch)5KInjector output 8 (boost SE / VVT positive NA)5L5 V output5MKnock input5NManifold air temperature5OSensor ground5PCoolant temperature5RInjector output 7 (VVT negative NA / spare turbo)5SIgnition switch input5TNC5UTPS input 25VTPS input 15WOxygen input 15XIMAP5ZCAN L5AAOxygen input 25ABFuel temperature5ACCAN H5ADNC5AEEMAP
Mazda MX-5 NB8B/NB8C manufacturer illustration
Open the scaled manufacturer pinout and product photograph. The image was proportionally reduced from the Adaptronic original to fit the wiki; source: Haltech's Adaptronic archive. Adaptronic illustration reproduced with permission. Consult the linked original ZIP for the unscaled source.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: Adaptronic eMod017
The Adaptronic eMod017 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Mazda MX-5 Miata NB8B and NB8C. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.
Application and installation
Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.
Model-specific pinout
In the eMod017 section of the manufacturer download archive, find: MX5_NB8B_C_Pinout.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: Basemap_NB8C_SE.ecu.
Documentation limits
Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.
MX-5 NB8B/NB8C connector assignments
From Adaptronic's MX5 NB8B/C pinout ZIP, preserved in the Haltech Adaptronic archive. The manufacturer sheet identifies the 2001–2005 naturally aspirated NB8B/C, the 2003–2005 NB8C-SE turbo and Australian 2001–2002 NB8B-SP turbo. Pin orientation is looking into the ECU; factory assignments and ECU functions can differ. See the sheet for factory functions, wire colours and vehicle-specific notes.
The sheet groups 2A–2AD as NC. It ends at 5AE, although the diagram also shows 5AF–5AH; these and other omitted positions remain unverified. Mod 1 and Mod 3 depend on the installed upgrade module. The manufacturer pinout includes a product photograph.
| Pin | Adaptronic function |
|---|
| 1A | Mod 3 (depends on installed module) |
| 1B | Mod 1 (depends on installed module) |
| 1C | NC |
| 1D | Mod 3 (depends on installed module) |
| 1E | Mod 1 (depends on installed module) |
| 1F | NC |
| 1G | Mod 3 (depends on installed module) |
| 1H | Mod 1 (depends on installed module) |
| 1J | Mod 3 (depends on installed module) |
| 1K | Mod 1 (depends on installed module) |
| 1L | NC |
| 1M | Mod 3 (depends on installed module) |
| 1N | NC |
| 1O | NC |
| 1Q | Mod 1 (depends on installed module) |
| 1R | NC |
| 1S | Mod 3 (depends on installed module) |
| 1T | Mod 1 (depends on installed module) |
| 1U | NC |
| 1V | NC |
| 2A–2AD | NC (grouped range as stated by manufacturer) |
| 3A | Injector output 1 |
| 3B | Ignition output 5 (cooling fan) |
| 3C | Ignition output 6 (condenser fan) |
| 3D | Injector output 2 |
| 3E | NC |
| 3F | NC |
| 3G | Injector output 3 |
| 3H | NC |
| 3I | NC |
| 3J | Injector output 4 |
| 3K | Ignition output 7 (A/C relay) |
| 3M | ECCS/fuel pump control output |
| 3N | Auxiliary output 2 (VTCS) |
| 3O | ECCS/fuel pump control output |
| 3P | 12 V power input |
| 3Q | Auxiliary output 1 (idle) |
| 3R | Auxiliary output 4 (check lamp) |
| 4A | Power ground |
| 4B | Power ground |
| 4C | Injector output 6 |
| 4D | Auxiliary output 3 |
| 4E | Ignition output 3 |
| 4F | Ignition output 1 (cylinders 1 and 4) |
| 4H | ECCS hardwired |
| 4I | Ignition output 2 (cylinders 2 and 3) |
| 4J | Power ground (front O2 heater) |
| 4K | External 0–5 V input 2 |
| 4L | Ignition output 4 |
| 4M | Alternator control |
| 4N | Fuel pressure |
| 4O | Tachometer |
| 4P | Power ground (rear O2 heater) |
| 4Q | CAS 3 |
| 4S | NC |
| 4T | Vehicle speed input |
| 4U | NC |
| 4V | CAS 2 (cam) |
| 4W | NC |
| 4X | Oil pressure |
| 4Y | CAS 1 (crank) |
| 4Z | Oil temperature |
| 5A | Power ground |
| 5B | NC |
| 5C | Digital input 3 (power steering) |
| 5D | Inverse of injector 8 (boost control) |
| 5E | Inverse of injector 8 (connected to 5D) |
| 5F | Digital input 4 (A/C request) |
| 5H | Digital input 2 (clutch) |
| 5I | Digital input 1 (neutral) |
| 5J | Injector output 5 (VTCS vacuum switch) |
| 5K | Injector output 8 (boost SE / VVT positive NA) |
| 5L | 5 V output |
| 5M | Knock input |
| 5N | Manifold air temperature |
| 5O | Sensor ground |
| 5P | Coolant temperature |
| 5R | Injector output 7 (VVT negative NA / spare turbo) |
| 5S | Ignition switch input |
| 5T | NC |
| 5U | TPS input 2 |
| 5V | TPS input 1 |
| 5W | Oxygen input 1 |
| 5X | IMAP |
| 5Z | CAN L |
| 5AA | Oxygen input 2 |
| 5AB | Fuel temperature |
| 5AC | CAN H |
| 5AD | NC |
| 5AE | EMAP |
Mazda MX-5 NB8B/NB8C manufacturer illustration
Open the scaled manufacturer pinout and product photograph. The image was proportionally reduced from the Adaptronic original to fit the wiki; source: Haltech's Adaptronic archive. Adaptronic illustration reproduced with permission. Consult the linked original ZIP for the unscaled source.

Revision 3: Adaptronic eMod017
The Adaptronic eMod017 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Mazda MX-5 Miata NB8B and NB8C. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.
Application and installation
Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.
Model-specific pinout
In the eMod017 section of the manufacturer download archive, find: MX5_NB8B_C_Pinout.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: Basemap_NB8C_SE.ecu.
Documentation limits
Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.
MX-5 NB8B/NB8C connector assignments
From Adaptronic's MX5 NB8B/C pinout ZIP, preserved in the Haltech Adaptronic archive. The manufacturer sheet identifies the 2001–2005 naturally aspirated NB8B/C, the 2003–2005 NB8C-SE turbo and Australian 2001–2002 NB8B-SP turbo. Pin orientation is looking into the ECU; factory assignments and ECU functions can differ. See the sheet for factory functions, wire colours and vehicle-specific notes.
The sheet groups 2A–2AD as NC. It ends at 5AE, although the diagram also shows 5AF–5AH; these and other omitted positions remain unverified. Mod 1 and Mod 3 depend on the installed upgrade module. The manufacturer pinout includes a product photograph.
| Pin | Adaptronic function |
|---|
| 1A | Mod 3 (depends on installed module) |
| 1B | Mod 1 (depends on installed module) |
| 1C | NC |
| 1D | Mod 3 (depends on installed module) |
| 1E | Mod 1 (depends on installed module) |
| 1F | NC |
| 1G | Mod 3 (depends on installed module) |
| 1H | Mod 1 (depends on installed module) |
| 1J | Mod 3 (depends on installed module) |
| 1K | Mod 1 (depends on installed module) |
| 1L | NC |
| 1M | Mod 3 (depends on installed module) |
| 1N | NC |
| 1O | NC |
| 1Q | Mod 1 (depends on installed module) |
| 1R | NC |
| 1S | Mod 3 (depends on installed module) |
| 1T | Mod 1 (depends on installed module) |
| 1U | NC |
| 1V | NC |
| 2A–2AD | NC (grouped range as stated by manufacturer) |
| 3A | Injector output 1 |
| 3B | Ignition output 5 (cooling fan) |
| 3C | Ignition output 6 (condenser fan) |
| 3D | Injector output 2 |
| 3E | NC |
| 3F | NC |
| 3G | Injector output 3 |
| 3H | NC |
| 3I | NC |
| 3J | Injector output 4 |
| 3K | Ignition output 7 (A/C relay) |
| 3M | ECCS/fuel pump control output |
| 3N | Auxiliary output 2 (VTCS) |
| 3O | ECCS/fuel pump control output |
| 3P | 12 V power input |
| 3Q | Auxiliary output 1 (idle) |
| 3R | Auxiliary output 4 (check lamp) |
| 4A | Power ground |
| 4B | Power ground |
| 4C | Injector output 6 |
| 4D | Auxiliary output 3 |
| 4E | Ignition output 3 |
| 4F | Ignition output 1 (cylinders 1 and 4) |
| 4H | ECCS hardwired |
| 4I | Ignition output 2 (cylinders 2 and 3) |
| 4J | Power ground (front O2 heater) |
| 4K | External 0–5 V input 2 |
| 4L | Ignition output 4 |
| 4M | Alternator control |
| 4N | Fuel pressure |
| 4O | Tachometer |
| 4P | Power ground (rear O2 heater) |
| 4Q | CAS 3 |
| 4S | NC |
| 4T | Vehicle speed input |
| 4U | NC |
| 4V | CAS 2 (cam) |
| 4W | NC |
| 4X | Oil pressure |
| 4Y | CAS 1 (crank) |
| 4Z | Oil temperature |
| 5A | Power ground |
| 5B | NC |
| 5C | Digital input 3 (power steering) |
| 5D | Inverse of injector 8 (boost control) |
| 5E | Inverse of injector 8 (connected to 5D) |
| 5F | Digital input 4 (A/C request) |
| 5H | Digital input 2 (clutch) |
| 5I | Digital input 1 (neutral) |
| 5J | Injector output 5 (VTCS vacuum switch) |
| 5K | Injector output 8 (boost SE / VVT positive NA) |
| 5L | 5 V output |
| 5M | Knock input |
| 5N | Manifold air temperature |
| 5O | Sensor ground |
| 5P | Coolant temperature |
| 5R | Injector output 7 (VVT negative NA / spare turbo) |
| 5S | Ignition switch input |
| 5T | NC |
| 5U | TPS input 2 |
| 5V | TPS input 1 |
| 5W | Oxygen input 1 |
| 5X | IMAP |
| 5Z | CAN L |
| 5AA | Oxygen input 2 |
| 5AB | Fuel temperature |
| 5AC | CAN H |
| 5AD | NC |
| 5AE | EMAP |
Mazda MX-5 NB8B/NB8C manufacturer illustration
Open the scaled manufacturer pinout and product photograph. The image was proportionally reduced from the Adaptronic original to fit the wiki; source: Haltech's Adaptronic archive. Adaptronic illustration reproduced with permission. Consult the linked original ZIP for the unscaled source.
