Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Adaptronic standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

The Adaptronic eMod017 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Mazda MX-5 Miata NB8B and NB8C. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.

Application and installation

Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.

Model-specific pinout

In the eMod017 section of the manufacturer download archive, find: MX5_NB8B_C_Pinout.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: Basemap_NB8C_SE.ecu.

Documentation limits

Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.

MX-5 NB8B/NB8C connector assignments

From Adaptronic's MX5 NB8B/C pinout ZIP, preserved in the Haltech Adaptronic archive. The manufacturer sheet identifies the 2001–2005 naturally aspirated NB8B/C, the 2003–2005 NB8C-SE turbo and Australian 2001–2002 NB8B-SP turbo. Pin orientation is looking into the ECU; factory assignments and ECU functions can differ. See the sheet for factory functions, wire colours and vehicle-specific notes.

The sheet groups 2A–2AD as NC. It ends at 5AE, although the diagram also shows 5AF–5AH; these and other omitted positions remain unverified. Mod 1 and Mod 3 depend on the installed upgrade module. The manufacturer pinout includes a product photograph.

PinAdaptronic function
1AMod 3 (depends on installed module)
1BMod 1 (depends on installed module)
1CNC
1DMod 3 (depends on installed module)
1EMod 1 (depends on installed module)
1FNC
1GMod 3 (depends on installed module)
1HMod 1 (depends on installed module)
1JMod 3 (depends on installed module)
1KMod 1 (depends on installed module)
1LNC
1MMod 3 (depends on installed module)
1NNC
1ONC
1QMod 1 (depends on installed module)
1RNC
1SMod 3 (depends on installed module)
1TMod 1 (depends on installed module)
1UNC
1VNC
2A–2ADNC (grouped range as stated by manufacturer)
3AInjector output 1
3BIgnition output 5 (cooling fan)
3CIgnition output 6 (condenser fan)
3DInjector output 2
3ENC
3FNC
3GInjector output 3
3HNC
3INC
3JInjector output 4
3KIgnition output 7 (A/C relay)
3MECCS/fuel pump control output
3NAuxiliary output 2 (VTCS)
3OECCS/fuel pump control output
3P12 V power input
3QAuxiliary output 1 (idle)
3RAuxiliary output 4 (check lamp)
4APower ground
4BPower ground
4CInjector output 6
4DAuxiliary output 3
4EIgnition output 3
4FIgnition output 1 (cylinders 1 and 4)
4HECCS hardwired
4IIgnition output 2 (cylinders 2 and 3)
4JPower ground (front O2 heater)
4KExternal 0–5 V input 2
4LIgnition output 4
4MAlternator control
4NFuel pressure
4OTachometer
4PPower ground (rear O2 heater)
4QCAS 3
4SNC
4TVehicle speed input
4UNC
4VCAS 2 (cam)
4WNC
4XOil pressure
4YCAS 1 (crank)
4ZOil temperature
5APower ground
5BNC
5CDigital input 3 (power steering)
5DInverse of injector 8 (boost control)
5EInverse of injector 8 (connected to 5D)
5FDigital input 4 (A/C request)
5HDigital input 2 (clutch)
5IDigital input 1 (neutral)
5JInjector output 5 (VTCS vacuum switch)
5KInjector output 8 (boost SE / VVT positive NA)
5L5 V output
5MKnock input
5NManifold air temperature
5OSensor ground
5PCoolant temperature
5RInjector output 7 (VVT negative NA / spare turbo)
5SIgnition switch input
5TNC
5UTPS input 2
5VTPS input 1
5WOxygen input 1
5XIMAP
5ZCAN L
5AAOxygen input 2
5ABFuel temperature
5ACCAN H
5ADNC
5AEEMAP

Mazda MX-5 NB8B/NB8C manufacturer illustration

Open the scaled manufacturer pinout and product photograph. The image was proportionally reduced from the Adaptronic original to fit the wiki; source: Haltech's Adaptronic archive. Adaptronic illustration reproduced with permission. Consult the linked original ZIP for the unscaled source.

Scaled Adaptronic Mazda MX-5 NB8B/NB8C manufacturer connector pinout and ECU photograph