The Adaptronic eMod004 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Nissan R32 Skyline GTST RB20DET, R33 Skyline GTST RB25DET, R32–R34 Skyline GT-R RB26DETT and Z32 300ZX VG30. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.
Application and installation
Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.
Model-specific pinout
In the eMod004 section of the manufacturer download archive, find: Nissan_R32_R33_Skyline_GTST_Pinout_Rev2.zip; Nissan_R32_R33_R34_GTR_RB26DETT_Pinout_Rev2.zip; Nissan_Z32_300ZX_VG30_Pinout_Rev2.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: separate RB25DET, RB26DETT and VG30 basemaps.
Documentation limits
Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.
Manufacturer connector tables and photographs
Illustrations: Adaptronic, preserved in the Haltech Adaptronic archive, reproduced with permission. Each manufacturer sheet includes a product photograph, connector orientation, factory function, Adaptronic function and manufacturer comments.
The diagrams look into the ECU, and are application-specific; consult the appropriate GTST, GT-R or Z32 sheet. The manufacturer lists RB20DET for the R32 GTST and RB25DET for the R33 GTST.
R32/R33 Skyline GTST — open the full-size manufacturer connector diagram and table.
R32/R33/R34 Skyline GT-R RB26DETT — open the full-size manufacturer connector diagram and table.
For the separate Z32 300ZX VG30 table, download the manufacturer ZIP.
R32/R33 Skyline GTST — connector table
Factory and Adaptronic functions are distinct columns. Mod 1 depends on the installed upgrade module. The original lists ignition output 7 at both pins 104 and 106; this duplication is unverified and should be checked against the particular ECU before wiring. Pin 58 is listed as factory battery supply but ECU NC. Check the illustrated comments and colours in the source sheet.
| Pin | Factory function | Adaptronic function |
|---|---|---|
| 101 | Injector cylinder 1 | Injector output 1 |
| 102 | No connection | Mod 1 |
| 103 | Injector cylinder 3 | Injector output 3 |
| 104 | Fuel pump control module 1 | Ignition output 7 |
| 105 | Injector cylinder 2 | Injector output 2 |
| 106 | No connection | Ignition output 7 |
| 107 | Injector ground | PGND |
| 108 | Injector ground | PGND |
| 109 | Inverse current feedback | Injector supply |
| 110 | Injector cylinder 5 | Injector output 5 |
| 111 | No connection | Mod 1 |
| 112 | Injector cylinder 6 | Injector output 6 |
| 113 | Variable valve timing solenoid | Injector output 7 |
| 114 | Injector cylinder 4 | Injector output 4 |
| 115 | EGT heater | PGND |
| 116 | Injector ground | PGND |
| 1 | Igniter cylinder 1 | Ignition output 1 |
| 2 | Igniter cylinder 5 | Ignition output 5 |
| 3 | Igniter cylinder 3 | Ignition output 3 |
| 4 | AAC valve | Auxiliary output 1 |
| 5 | No connection | Servo input |
| 6 | No connection | Ignition output 8 |
| 7 | Tacho speed signal | Tacho output |
| 8 | No connection | Ignition switch input |
| 9 | Air conditioning relay | Auxiliary output 2 |
| 10 | Ignition ground | PGND |
| 11 | Igniter cylinder 6 | Ignition output 6 |
| 12 | Igniter cylinder 2 | Ignition output 2 |
| 13 | Igniter cylinder 4 | Ignition output 4 |
| 14 | No connection | Mod 1 |
| 15 | No connection | External 0–5 V input 2 |
| 16 | ECCS relay | ECCS hardwired |
| 17 | Injector pulse | Injector duty hardwired |
| 18 | Fuel pump relay | ECCS/fuel pump control output |
| 19 | Power steering switch | Digital input 3 |
| 20 | Ignition ground | PGND |
| 21 | Serial RX | CAN L |
| 22 | Serial TX | CAN H |
| 23 | Knock sensor 1, cylinders 1–3 | Knock input |
| 24 | Knock sensor 2, cylinders 4–6 | Knock input |
| 25 | Boost control | Auxiliary output 3 |
| 26 | AFM ground | Mod 1 |
| 27 | AFM signal | IMAP |
| 28 | Engine coolant temperature | ECT |
| 29 | Oxygen sensor signal | O2 input 1 |
| 30 | Sensor ground | SGND |
| 31 | Clock serial | External 0–5 V input 1 |
| 32 | Check light | Injector output 8 |
| 33 | EGT warning light | Oil pressure |
| 34 | No connection | Digital input 1 |
| 35 | No connection | EMAP |
| 36 | No connection / FICD on some cars | Fuel temperature |
| 37 | No connection | MAT |
| 38 | Throttle close switch | TPS input 1 |
| 39 | No connection | Oil temperature |
| 40 | No connection | Fuel pressure |
| 41 | Cam angle 120° | CAS 2 |
| 42 | Cam angle 1° | CAS 1 |
| 43 | Ignition start switch | NC |
| 44 | Neutral switch | Digital input 2 |
| 45 | Ignition switch | Ignition switch input |
| 46 | A/C switch | Digital input 4 |
| 47 | CONSULT check pin | CAS 3 |
| 48 | TPS +5 V output | 5 V output |
| 49 | Control unit power supply | 12 V power input |
| 50 | Control unit ground | PGND |
| 51 | Cam angle 120° | CAS 2 |
| 52 | Cam angle 1° | CAS 1 |
| 53 | Vehicle speed signal | VSS input |
| 54 | No connection | Mod 1 |
| 55 | No connection | O2 input 2 |
| 56 | Throttle position signal | TPS input 2 |
| 57 | EGT signal | Mod 1 |
| 58 | Battery power supply | NC |
| 59 | Control unit power supply | 12 V power input |
| 60 | Control unit ground | PGND |
Nissan Z32 300ZX VG30 manufacturer illustration
Open the scaled manufacturer pinout and product photograph. The image was proportionally reduced from the Adaptronic original to fit the wiki; source: Haltech's Adaptronic archive. Adaptronic illustration reproduced with permission. Consult the linked original ZIP for the unscaled source.


