Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MBE Systems standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

MBE 970 is an older serial ECU listed in SBD’s historic wiring archive and AiM’s model-specific integration guide. The exact vehicle-specific build and mapping access need confirmation. Source and identification.

Wiring and pinout

Model wiring documentation: AiM 967/970 communications and connector guide; confirm exact unit and version. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.

Configuration and support

For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.

Evidence limits

Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.

Documented serial connections

AiM's MBE 967/970 integration guide, page 4, identifies a 55-way front connector on its MBE 970 example. This is a partial communications schedule; it must not be replaced with the 36-way MBE 967 schedule. Pin 45/46 directions are as documented for the 970 example and differ from the 941 document.

970 55-way front connector: communications

ECU pinFunction
7Ground
45ECU RS-232 receive
46ECU RS-232 transmit

Throttle potentiometer connections

SBD’s serial-ECU throttle-pot guide gives the following connections for its 941/970 applications. This is a partial schedule for that documented harness, not a complete model pinout. Confirm the ECU variant and wiring at the unit.

ECU pinThrottle sensor connection
12Electronic ground / sensor return
305 V throttle reference
35Throttle signal