The original Garmin Catalyst combines a driver display, GNSS-based track analysis and a wired Remote Cam for lap comparisons and audible coaching. It is a track-driving coaching system rather than a sensor-rich ECU logger. Garmin product introduction.

Specifications and data
The Remote Cam records 1080p video at 30 fps; lap and segment analysis combines position, movement and video. The powered mount supplies the camera during a drive: the display battery alone does not provide a complete recording setup. Garmin states that the original Catalyst does not acquire OBD-II vehicle data. Garmin video specifications; Garmin OBD-II answer.
Connections and wiring
The Remote Cam connects via its micro-USB port and the supplied long camera cable to the USB port on the powered magnetic mount. The mount uses the supplied vehicle power arrangement. The short computer cable is a separate item. See Garmin's camera-cable instructions and cable identification.
Garmin's device overview identifies a 14-contact magnetic mount interface, but does not publish its individual pin functions. No CAN or ECU pinout should be inferred. On the model's supplied bare-wire power adapter, red is 10–30 V DC input and black is system ground; these colours are specific to that adapter. Follow Garmin’s installation instructions and use the correct fused adapter.
See the Garmin manufacturer guide for comparison with Catalyst 2.