Page organisation in this revision
- Page type
- Technical article
- Subject
- ABS / DSC
- Parent
- Continental Teves MK 25E
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Continental
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
ABS and traction systems · System reference
Scope and connector
The 2008 Saturn VUE AWD connector index labels a black sealed 47-way MK25-series female EBCM connector, OEM 13547678 / service 19115598. A separate 2008 VUE AWD 3.5 L service description identifies MK 25E; verify the actual engine, options and connector before using this vehicle-wide table. The two pairs are identified as separate circuits in the source; do not assume they are interchangeable.
Sensor-label uncertainty: the 2008 AWD connector index labels terminals 34, 36, 43 and 45 as wheel-speed sensor supply, whereas a 3.6 L AWD diagnostic reference describes corresponding sensor circuits as low reference. These sources cover different documented scopes; confirm the exact vehicle wiring rather than assuming the two labels are interchangeable.
Documented terminal assignments
TerminalDocumented connection1Battery positive, circuit 2403Vehicle speed signal, circuit 817; source marks -LAT8Serial data communication enable, circuit 598611High-speed GMLAN positive, circuit 250012High-speed GMLAN positive, circuit 250013High-speed GMLAN negative, circuit 250114High-speed GMLAN negative, circuit 250116Ground, circuit 5118CAN high serial data, circuit 643319CAN low serial data, circuit 643222Steering-angle sensor 5 V reference, circuit 604429Steering-angle sensor low reference, circuit 604532Battery positive, circuit 84033Front-right wheel-speed sensor signal, circuit 87234Front-right sensor second circuit 7065; function label needs confirmation36Rear-left sensor second circuit 7127; function label needs confirmation37Rear-left wheel-speed sensor signal, circuit 88442Rear-right wheel-speed sensor signal, circuit 88243Rear-right sensor second circuit 7128; function label needs confirmation45Front-left sensor second circuit 7064; function label needs confirmation46Front-left wheel-speed sensor signal, circuit 830
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources
GM 2008 VUE AWD EBCM connector end-view index2008 VUE AWD 3.5 L system description2008 VUE AWD 3.6 L speed-sensor diagnostics
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Saturn Vue 2008 AWD Continental MK 25E EBCM connector pinout
ABS and traction systems · System reference
Scope and connector
The 2008 Saturn VUE AWD connector index labels a black sealed 47-way MK25-series female EBCM connector, OEM 13547678 / service 19115598. A separate 2008 VUE AWD 3.5 L service description identifies MK 25E; verify the actual engine, options and connector before using this vehicle-wide table. The two pairs are identified as separate circuits in the source; do not assume they are interchangeable.
Sensor-label uncertainty: the 2008 AWD connector index labels terminals 34, 36, 43 and 45 as wheel-speed sensor supply, whereas a 3.6 L AWD diagnostic reference describes corresponding sensor circuits as low reference. These sources cover different documented scopes; confirm the exact vehicle wiring rather than assuming the two labels are interchangeable.
Documented terminal assignments
| Terminal | Documented connection |
|---|
| 1 | Battery positive, circuit 240 |
| 3 | Vehicle speed signal, circuit 817; source marks -LAT |
| 8 | Serial data communication enable, circuit 5986 |
| 11 | High-speed GMLAN positive, circuit 2500 |
| 12 | High-speed GMLAN positive, circuit 2500 |
| 13 | High-speed GMLAN negative, circuit 2501 |
| 14 | High-speed GMLAN negative, circuit 2501 |
| 16 | Ground, circuit 51 |
| 18 | CAN high serial data, circuit 6433 |
| 19 | CAN low serial data, circuit 6432 |
| 22 | Steering-angle sensor 5 V reference, circuit 6044 |
| 29 | Steering-angle sensor low reference, circuit 6045 |
| 32 | Battery positive, circuit 840 |
| 33 | Front-right wheel-speed sensor signal, circuit 872 |
| 34 | Front-right sensor second circuit 7065; function label needs confirmation |
| 36 | Rear-left sensor second circuit 7127; function label needs confirmation |
| 37 | Rear-left wheel-speed sensor signal, circuit 884 |
| 42 | Rear-right wheel-speed sensor signal, circuit 882 |
| 43 | Rear-right sensor second circuit 7128; function label needs confirmation |
| 45 | Front-left sensor second circuit 7064; function label needs confirmation |
| 46 | Front-left wheel-speed sensor signal, circuit 830 |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources
Revision 2: Saturn Vue 2008 AWD Continental MK 25E EBCM connector pinout
ABS and traction systems · System reference
Scope and connector
The 2008 Saturn VUE AWD connector index labels a black sealed 47-way MK25-series female EBCM connector, OEM 13547678 / service 19115598. A separate 2008 VUE AWD 3.5 L service description identifies MK 25E; verify the actual engine, options and connector before using this vehicle-wide table. The two pairs are identified as separate circuits in the source; do not assume they are interchangeable.
Sensor-label uncertainty: the 2008 AWD connector index labels terminals 34, 36, 43 and 45 as wheel-speed sensor supply, whereas a 3.6 L AWD diagnostic reference describes corresponding sensor circuits as low reference. These sources cover different documented scopes; confirm the exact vehicle wiring rather than assuming the two labels are interchangeable.
Documented terminal assignments
| Terminal | Documented connection |
|---|
| 1 | Battery positive, circuit 240 |
| 3 | Vehicle speed signal, circuit 817; source marks -LAT |
| 8 | Serial data communication enable, circuit 5986 |
| 11 | High-speed GMLAN positive, circuit 2500 |
| 12 | High-speed GMLAN positive, circuit 2500 |
| 13 | High-speed GMLAN negative, circuit 2501 |
| 14 | High-speed GMLAN negative, circuit 2501 |
| 16 | Ground, circuit 51 |
| 18 | CAN high serial data, circuit 6433 |
| 19 | CAN low serial data, circuit 6432 |
| 22 | Steering-angle sensor 5 V reference, circuit 6044 |
| 29 | Steering-angle sensor low reference, circuit 6045 |
| 32 | Battery positive, circuit 840 |
| 33 | Front-right wheel-speed sensor signal, circuit 872 |
| 34 | Front-right sensor second circuit 7065; function label needs confirmation |
| 36 | Rear-left sensor second circuit 7127; function label needs confirmation |
| 37 | Rear-left wheel-speed sensor signal, circuit 884 |
| 42 | Rear-right wheel-speed sensor signal, circuit 882 |
| 43 | Rear-right sensor second circuit 7128; function label needs confirmation |
| 45 | Front-left sensor second circuit 7064; function label needs confirmation |
| 46 | Front-left wheel-speed sensor signal, circuit 830 |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources