Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
ATE Teves 20 GI
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
ATE

ABS and traction systems · System reference

Scope and connector

Volkswagen Golf Mk3 Teves 20 GI ABS-control-unit J104 T25 harness connector as described in the reproduced Golf platform A3 service table. The sensor pairs are named connections without stated polarity. The same family in a Passat reference uses a different coding bridge, so do not transfer the Golf bridge to another model.

Documented terminal assignments

TerminalDocumented connection
1 and 17Rear-right wheel-speed sensor G44
2 and 10Rear-left wheel-speed sensor G46
3 and 18Front-right wheel-speed sensor G45
4 and 11Front-left wheel-speed sensor G47
8Ground terminal 31
9Battery positive via S124
12Brake-light switch F
13K-line via T16/7
15 and 21Coding bridge between 15 and 21 in this Golf reference
16ABS warning-lamp activation
23Terminal X supply
24Ground terminal 31
25Battery positive via S123

Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.

Sources