Page organisation in this revision
- Page type
- Technical article
- Subject
- ABS / DSC
- Parent
- Bosch ABS 8.0
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Bosch
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ESP 8.0 Vdiag 08, 46-way controller connector. Renault MR-372 sections 38C-53–54. This table is separate from the ABS-only 26-way Vdiag 0C installation. Check the VIN, controller identification and equipment; do not infer a connector-face orientation from the table.
Documented terminal assignments
TerminalDocumented connection1Pump motor ground2Pump motor supply3Solenoid valve supply4Controller and solenoid ground5Front-left speed sensor signal6Rear-left speed sensor supply8Rear-right speed sensor supply9Front-right speed sensor supply10Front-right speed sensor signal11K-line diagnostic14CAN low15Combined sensor ground16Yaw-rate signal18Combined sensor reference signal20Lateral-acceleration signal22Brake-lamp relay activation output26Front-left speed sensor supply27Rear-left speed sensor signal28Controller supply29Rear-right speed sensor signal30Brake pedal switch, closing contact31ASR/ESP disconnect switch input33Hardwired vehicle-speed signal35CAN high37Combined-sensor test line
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources
Renault MR-372, 38C-53–54 (PDF pp. 275–276)
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Renault Scenic II Bosch ESP 8.0 Vdiag 08 connector pinout
ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ESP 8.0 Vdiag 08, 46-way controller connector. Renault MR-372 sections 38C-53–54. This table is separate from the ABS-only 26-way Vdiag 0C installation. Check the VIN, controller identification and equipment; do not infer a connector-face orientation from the table.
Documented terminal assignments
| Terminal | Documented connection |
|---|
| 1 | Pump motor ground |
| 2 | Pump motor supply |
| 3 | Solenoid valve supply |
| 4 | Controller and solenoid ground |
| 5 | Front-left speed sensor signal |
| 6 | Rear-left speed sensor supply |
| 8 | Rear-right speed sensor supply |
| 9 | Front-right speed sensor supply |
| 10 | Front-right speed sensor signal |
| 11 | K-line diagnostic |
| 14 | CAN low |
| 15 | Combined sensor ground |
| 16 | Yaw-rate signal |
| 18 | Combined sensor reference signal |
| 20 | Lateral-acceleration signal |
| 22 | Brake-lamp relay activation output |
| 26 | Front-left speed sensor supply |
| 27 | Rear-left speed sensor signal |
| 28 | Controller supply |
| 29 | Rear-right speed sensor signal |
| 30 | Brake pedal switch, closing contact |
| 31 | ASR/ESP disconnect switch input |
| 33 | Hardwired vehicle-speed signal |
| 35 | CAN high |
| 37 | Combined-sensor test line |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources
Revision 1: Renault Scenic II Bosch ESP 8.0 Vdiag 08 connector pinout
ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ESP 8.0 Vdiag 08, 46-way controller connector. Renault MR-372 sections 38C-53–54. This table is separate from the ABS-only 26-way Vdiag 0C installation. Check the VIN, controller identification and equipment; do not infer a connector-face orientation from the table.
Documented terminal assignments
| Terminal | Documented connection |
|---|
| 1 | Pump motor ground |
| 2 | Pump motor supply |
| 3 | Solenoid valve supply |
| 4 | Controller and solenoid ground |
| 5 | Front-left speed sensor signal |
| 6 | Rear-left speed sensor supply |
| 8 | Rear-right speed sensor supply |
| 9 | Front-right speed sensor supply |
| 10 | Front-right speed sensor signal |
| 11 | K-line diagnostic |
| 14 | CAN low |
| 15 | Combined sensor ground |
| 16 | Yaw-rate signal |
| 18 | Combined sensor reference signal |
| 20 | Lateral-acceleration signal |
| 22 | Brake-lamp relay activation output |
| 26 | Front-left speed sensor supply |
| 27 | Rear-left speed sensor signal |
| 28 | Controller supply |
| 29 | Rear-right speed sensor signal |
| 30 | Brake pedal switch, closing contact |
| 31 | ASR/ESP disconnect switch input |
| 33 | Hardwired vehicle-speed signal |
| 35 | CAN high |
| 37 | Combined-sensor test line |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources