ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ESP 8.0 Vdiag 08, 46-way controller connector. Renault MR-372 sections 38C-53–54. This table is separate from the ABS-only 26-way Vdiag 0C installation. Check the VIN, controller identification and equipment; do not infer a connector-face orientation from the table.
Documented terminal assignments
| Terminal | Documented connection |
|---|---|
| 1 | Pump motor ground |
| 2 | Pump motor supply |
| 3 | Solenoid valve supply |
| 4 | Controller and solenoid ground |
| 5 | Front-left speed sensor signal |
| 6 | Rear-left speed sensor supply |
| 8 | Rear-right speed sensor supply |
| 9 | Front-right speed sensor supply |
| 10 | Front-right speed sensor signal |
| 11 | K-line diagnostic |
| 14 | CAN low |
| 15 | Combined sensor ground |
| 16 | Yaw-rate signal |
| 18 | Combined sensor reference signal |
| 20 | Lateral-acceleration signal |
| 22 | Brake-lamp relay activation output |
| 26 | Front-left speed sensor supply |
| 27 | Rear-left speed sensor signal |
| 28 | Controller supply |
| 29 | Rear-right speed sensor signal |
| 30 | Brake pedal switch, closing contact |
| 31 | ASR/ESP disconnect switch input |
| 33 | Hardwired vehicle-speed signal |
| 35 | CAN high |
| 37 | Combined-sensor test line |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.