Dynocom Industries supplies roller and hub dynamometers, control and data-acquisition equipment. Different frame, brake and controller combinations exist, so identify the actual installation before comparing models.

History
An earlier Dynocom brochure describes its origins as a division of a parent business and records the opening of its US headquarters in Fort Worth in 2006. A later 2016 company court filing describes Paul Arseneau as founder and dates the company to 2004. These accounts describe the early business differently, so a single earlier founding date should not be assumed.
Representative dynamometers
- 15,000 Series: a vehicle roller chassis line; a dual eddy-current brake DE configuration and mobile trailer version are listed. Dynocom product listing.
- AWD 2000 POD: four hub-coupled eddy-current absorber units in the listed AWD configuration. Wheels on tested hubs are removed and adapters connect the hubs to pods. AWD 2000 product page.
- AWD 4500: another four-pod hub system using eddy-current units. AWD 4500 product page.
Eddy-current units absorb shaft power as heat; available speed and load modes depend on the hardware and cooling. Hub power still includes vehicle driveline losses, while the tyre-to-roller interface is omitted.
Controllers and software
An older DC Controller brochure describes an earlier data and control generation. Dynocom lists Genesis/Quantum real-time DAQ hardware and Quantum Real Time software for the Genesis platform. Compatibility between older sensors, brake drivers and a proposed replacement controller must be confirmed with the supplier.
Part of Dynamometers and the manufacturers and suppliers directory. The products below are selected examples, not a complete catalogue; specifications, software and availability vary with generation and configuration.