Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Dynojet Research makes vehicle dynamometers and tuning products. Its automotive and motorcycle equipment includes inertia-based roller systems and models with adjustable eddy-current load.

Dynojet 224xLC roller chassis dynamometer and load-control enclosure.
Dynojet 224xLC rolling road with eddy-current load control. Image: Dynojet UK; used by permission.

History

According to Dynojet's company history, its origins lie in motorcycle racing and carburettor jet kits. The company describes developing an inertia drum dynamometer to evaluate its tuning products, then expanding into other fuel and electronic tuning products. Its history names Power Commander and later Power Vision; those are vehicle tuning devices rather than the dyno's controller.

Models and operation

  • 224x: a two-wheel-drive chassis roller system; 224xLC adds eddy-current load control for modes including load testing. The vehicle drives the drum through its tyres. Dynojet 2WD range.
  • 424x and 424xLC²: four-wheel-drive family entries in the manufacturer's DynoWare RT installation guide. Verify the physical coupling and brake configuration on the exact machine.
  • Dynojet also supplies motorcycle dynos. Its older WinPEP motorcycle guide documents an earlier software generation.

An inertia test uses measured drum acceleration and known inertia; an LC machine adds an adjustable brake. A controlled load can enable held points within the brake's operating envelope. Roller output is not the same as measured crankshaft output; see inertia dynamometers.

Controllers and data

DynoWare is dyno electronics; Power Core is the software suite used for analysis and dyno operation. A DynoWare RT upgrade guide documents replacing earlier DynoWare EX on specified 224/248 models. Controller generation, installed brake, optional sensors and upgrade compatibility must be checked individually. Power Commander is an engine fuelling product and should not be confused with these dyno controls.

Part of Dynamometers and the manufacturers and suppliers directory. The products below are selected examples, not a complete catalogue; specifications, software and availability vary with generation and configuration.