Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MBE Systems standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

The MBE 998 is identified in AiM’s model-specific ECU integration material, including distinct CAN and traction/gearbox configurations. Check the exact variant and obtain the correct harness documentation. Source and identification.

Wiring and pinout

Model wiring documentation: MTO Engineering download archive lists a 998 pinout spreadsheet; verify the exact hardware and version. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.

Configuration and support

For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.

Evidence limits

Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.

Documented CAN connections

AiM's MBE 998 CAN integration guide identifies these two pins on the 36-way J2 front connector. This is a partial communications schedule; it does not establish the engine-control wiring or every 998 variant.

998 J2 connector: documented CAN pins

J2 pinFunction
6CAN high
7CAN low