Dastek is a name encountered on chassis dynamometers, dyno-control upgrades and Unichip vehicle-tuning equipment. These are different products: a Unichip is a vehicle tuning device, whereas a dynamometer controller acquires measurements and controls the test machine. See Dynamometers and manufacturers and suppliers.

Background and history
A Dastek-branded dynamometer page describes its rolling road as having developed from an older machine upgraded by its operators, followed by hand-built chassis dynamometers. That page does not establish a dated model timeline, so one is not assumed here. Separately, Unichip's product history describes Dastek's programmable vehicle piggyback technology originating in the 1990s. The Unichip chronology should not be treated as a launch date for any particular dyno.
Chassis dynos and refurbishment
Dastek-branded rolling roads are encountered in two-wheel-drive and all-wheel-drive installations; equipment and control arrangements vary. The maker's archived page describes its own chassis dynos, and a 2016 Advanced Dyno Solutions refurbishment documents a particular Dastek chassis being repaired and fitted with electronics. This is evidence of that individual project, not a model catalogue or proof that every Dastek unit has identical hardware.
Control and instrumentation
Advanced Dyno Solutions lists a Dastek 2WD controller upgrade package and a 4WD upgrade. A retrofit can combine a controller, speed sensors, load-cell measurement and an existing brake and roller frame, depending on the supplied package. The advertised control system does not itself establish the dyno's axle synchronisation, absorber capacity or original manufacturer.
When identifying a unit, record the actual roller and absorber labels, controller and software version, number of driven axles, speed sensing, brake power supply and calibration evidence. Ask the supplier for the applicable manuals, supported test modes and current parts. See dynamometer control systems and UK rebuilders and refurbishment.
Evidence checked 17 November 2026. Named dyno model generations and an independent dated corporate timeline remain unverified in the sources above.