Dyno Developments is a UK dynamometer and calibration-equipment supplier based in Stevenage. Its website describes equipment designed and assembled in the UK, including two-wheel-drive, four-wheel-drive and custom applications. Dyno Developments.

History
The supplier describes over 20 years in automotive calibration and measurement, without giving a precise founding date on its home page. A November 2017 Ultimate Porsche article identifies a Stevenage Dyno Developments business supplying 2WD and 4WD rolling roads and names Mike Gurney in its contemporary account. This documents the business by 2017; it does not establish current ownership or a founding date. Do not conflate it with an unrelated same-named dissolved plumbing company.
DD Precision chassis dynos
- DD Precision 2WD: the supplier describes a portable or fixed roller system offering steady-state and power-sweep testing, and says it can be upgraded to 4WD. The supplier's specification page lists up to 1,200 hp at the wheels for this model.
- DD Precision 4WD: the supplier lists 2,400 hp at the wheels and above- or in-ground installation, with steady-state, sweep and road-load modes. Wheelbase and equipment configuration should be checked for the vehicle and exact installation.
- The supplier also describes motorcycle, ATV, truck, engine and custom dynamometers, without enough published detail on the home page to establish a full individual model catalogue.
Headline power limits are supplier-stated maximums; check the complete speed, torque, axle-load and continuous-duty envelope. A 4WD vehicle's compatibility depends on its driveline, axle synchronisation and the precise machine configuration.
Controllers and data
The product pages describe adaptive load control, steady speed, sweep tests, and options or channels for CAN data, boost, air–fuel ratio and temperature. A distributor description discusses eddy-brake loading, Dyno Developments software and a remote controller for a particular offering. Exact components, software version and sensor packages vary by installation. PEREK separately lists Dyno Developments among dynos it has experience upgrading; this does not establish that PEREK is the original controller on all machines.
Service and identification
The manufacturer advertises installation, training and technical support with its equipment. Its public product pages do not establish that it rebuilds third-party dynos; confirm any refurbishment request directly. Identify the frame, brake, controller, sensors and calibration records of an individual machine before specifying replacement parts or upgrades.
Related: Dynamometers · Manufacturers and suppliers · UK rebuilders and refurbishment.