Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Dynamometer World is a UK supplier and specialist in repair and overhaul of engine and chassis dynamometers. Its published work includes eddy-current and hydraulic machines from several manufacturers, as well as spares and test-cell equipment. Dynamometer World company information.

Blue SAJ eddy-current engine dynamometer shown on Dynamometer World's product page.
SAJ eddy-current dynamometer shown by Dynamometer World as a supplied product. Image: Dynamometer World; used by permission.

History

Companies House records Dynamometer World Limited as incorporated on 6 April 2004. The supplier describes Worcester workshop overhauls, on-site maintenance and reconditioned equipment. Its historical catalogues and quotations are examples of equipment offered at the time, not proof that a specific unit remains in stock.

Dyno makes and models

The company's SAJ product page, published in 2016, lists the SE water-cooled air-gap eddy-current range, including SE 10, SE 150, SE 250 and SE 720. These are SAJ models offered by Dynamometer World, not dynos of its own design. The supplier lists overhaul work on Froude, SAJ, Schenck, Borghi & Saveri, Horiba, D2T and APICOM equipment. A 2014 pallet-system quotation names Froude EC38, EC50 and AG250 as examples compatible with a described used stand; it is not a current stock commitment.

Controllers and overhaul

The site hosts documentation for the D3000 digital dyno controller, whose manual describes AC, DC, eddy-current and hydraulic interfaces and replacement of a TA S3000. The REO-dEC brochure is another example hosted by the supplier. Neither document means every refurbished dyno has that controller; check the supplied system and capabilities.

Its published typical overhaul describes inspection, dismantling, cleaning, measurement, electrical checks, reporting, rotor balancing as necessary, replacement bearings and seals, spin testing and a pass-off report. Exact work depends on the unit and quotation.

Related: Dynamometers · Manufacturers and suppliers · UK rebuilders and refurbishment.