Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

SportDevices designs dynamometers and instrumentation for engine and vehicle testing. Its SP-series units measure signals and, depending on model and installed hardware, control a brake. A controller kit and a complete dynamometer are different purchases; a frame, roller, absorber and supporting equipment may be supplied separately. See Dynamometers and the manufacturers directory.

SportDevices SP5 dynamometer data-acquisition and control unit.
SP5 dyno data-acquisition and control unit. Image: SportDevices SP5 product page, used with permission.

History and scope

SportDevices states that José Andani and José Luis Cortés founded the business in 2001. Its own history identifies the SP1 as an established early controller and describes products for motorcycle chassis, engine and shock-absorber test systems. The company lists its headquarters near Valencia, Spain. SportDevices: about.

Dyno and test applications

Its documentation covers motorcycle and car rolling roads, engine test beds and hub dynos. These are installation types, not evidence that a single controller or frame automatically supports all of them. The SP5 product guide illustrates single-axle roller layouts, AWD and two-brake hub use with the appropriate sensors, power supplies and configuration.

Controllers and software

  • SP1 and SP1+: the manufacturer lists the SP1 as a single-roller-channel unit; the SP1+ adds a load-cell input and brake output in its comparison. Check the exact model and installed options.
  • SP5: a brake-dyno data-acquisition and control unit with two roller or brake speed channels and load-cell inputs. SportDevices describes inertial, steady, ramp and fixed-brake modes. Its AWD arrangement needs additional components and activation.
  • SP6: the manufacturer's comparison lists configurations with up to four roller channels and a four-brake hub option. Installation and features depend on variant.

SportDyno software provides acquisition, graphs, test comparison and selectable test modes; functionality and licensing vary. An eddy-current brake requires a compatible power supply and control circuit, and a water brake needs its own valve actuator. Controller commands alone do not add braking or motoring capability to a dyno.

Identifying an installation

Record the frame and absorber maker as well as the SP unit, firmware and SportDyno version, channel count, speed pickups, load cells and power module. A retrofitted controller does not change the mechanical ratings of the original dyno. See dynamometer control systems and the manufacturer manuals.

Details are based on the linked manufacturer sources checked 17 November 2026; configurations and availability can change.