Haltech IG4: IG4 is a historical Haltech ignition controller. The manufacturer lists a distinct IG4 manual and legacy software. It is included for identification as an ignition controller; this does not establish a complete standalone fuel-injection ECU. Manufacturer information.
Identification and connection
Record ECU model, serial, hardware revision, firmware and loom part number before choosing wiring. Choose the IG4 manual in Haltech's discontinued archive for the exact hardware, output circuitry and connector view. Pin-by-pin assignments and injector functionality have not been verified here. Model-specific manual or diagram.
Software and related models
Use the manufacturer's model-appropriate software and documentation. Configuration and available outputs depend on exact hardware and the intended installation. See the manufacturer model index for related systems.
GM crank sensor connection shown in manufacturer manual
The Haltech IG4 manual includes a hand-drawn GM crank-sensor connection example on PDF page 28. The following are the four terminals of the illustrated sensor connector, not the IG4 ECU connector. The drawing does not establish the complete IG4 ECU pinout or clearly label the connector viewing direction; verify the specific sensor and loom before use.
| Sensor terminal | Wire colour | Illustrated function |
|---|---|---|
| A | Green | Home |
| B | White | Trigger |
| C | Black | Ground |
| D | Red | +12 V power |