Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
ATE, Teves and Continental ABS systems
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
ATE, Continental

ABS and traction systems · ATE, Teves and Continental manufacturer directory

System identification

ATE says the integrated ABS MK II reached series production in 1984 and was used by Ford USA and Ford Europe. Continental identifies MK II as Teves' production microprocessor-controlled passenger-car ABS.

Documented examples and configuration

This is a historical Teves family name. The next MK IV is a distinct design: ITT-Teves authors describe MK IV as an add-on system with vacuum-boosted actuation, contrasting its layout with MK II.

Identification and service limits

A historical family name alone does not specify a car's hydraulic layout, controller or service procedure. Confirm the installed components and use vehicle-specific workshop information.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Sources