Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MicroTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

MicroTech LT-16c is a standalone or earlier programmable engine-management system. LT-16c is listed with eight injector and eight ignition outputs, supporting sequential operation on specified four-, six- and eight-cylinder and two- to four-rotor engines. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

The MicroTech LSU 4.9 wideband guide identifies the LT-16c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.

Further information

Wideband controller connections

MicroTech's LSU 4.9 wideband kit guide identifies these 16C ECU connections. The guide locates the dedicated oxygen-sensor ground on the 12-way auxiliary connector next to the handset port. This table covers the wideband signal and ground only, not the full ECU connector.

ECU wireFunction
Black/redOxygen sensor input
BrownOxygen sensor ground

Driveshaft speed sensor connections

MicroTech's driveshaft sensor kit guide lists these 16C harness connections for compatible units manufactured from 2018 onward. The guide says earlier units require a software update. This is a sensor wiring table, not a complete ECU pinout.

Sensor wireSensor functionECU harness wireECU function
BlueGroundBlackGround
Brown+5 VBlue+5 V sensor supply
BlackSpeed signalBlue/whiteDriveshaft input