MicroTech LT-16c is a standalone or earlier programmable engine-management system. LT-16c is listed with eight injector and eight ignition outputs, supporting sequential operation on specified four-, six- and eight-cylinder and two- to four-rotor engines. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
The MicroTech LSU 4.9 wideband guide identifies the LT-16c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.
Further information
- MicroTech LT-16c model information
- LSU 4.9 wideband connection guide (partial wiring only)
- MicroTech manufacturer index
Wideband controller connections
MicroTech's LSU 4.9 wideband kit guide identifies these 16C ECU connections. The guide locates the dedicated oxygen-sensor ground on the 12-way auxiliary connector next to the handset port. This table covers the wideband signal and ground only, not the full ECU connector.
| ECU wire | Function |
|---|---|
| Black/red | Oxygen sensor input |
| Brown | Oxygen sensor ground |