
Link G4X JZX100X is a vehicle-specific programmable plug-in ECU for the Toyota JZX100 application listed in Link's model-specific manuals index. It is an application board rather than a universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's JZX100X installation manual.
Identification and installation
Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.
G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.
Pinout and tuning
The JZX100X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.
Manufacturer connector schedules
From Link's JZX100X installation manual. Link describes the pinout view as looking into the ECU from the wire side. A dash reproduces an unspecified source field; nc is Link's label. Confirm the vehicle, market and board revision before use.
The manufacturer labels main position 3 only “C88” without a cavity number; this is retained as published. Ignition 4–6 auxiliary channels are shared between the main and expansion headers. CAN 1 is not externally connected on this model; CAN 2 serves the vehicle temperature gauge and A/C system.
Factory main header
| Factory pin | Link ECU channel | Factory function |
|---|---|---|
| 1 (C88 10) | Injector 1 | Injection |
| 63 (C85 5) | nc | — |
| 2 (C88 9) | Injector 2 | Injection |
| 64 (C85 11) | nc | — |
| 3 (C88) | Injector 3 | Injection |
| 65 (C85 10) | Aux 11 | Fuel Pump |
| 4 (C88 7) | Injector 4 | Injection |
| 66 (C85 9) | nc | — |
| 5 (C88 6) | Injector 5 | Injection |
| 67 (C85 8) | nc | — |
| 6 (C88 5) | Injector 6 | Injection |
| 68 (C85 16) | nc | — |
| 7 (C88 4) | nc | — |
| 69 (C85 15) | nc | — |
| 8 (C88 3) | nc | — |
| 70 (C85 14) | Injector 7 (Aux) | Air Bypass Valve (ABV) |
| 9 (C88 2) | nc | — |
| 71 (C85 13) | Aux 2 | Purge |
| 10 (C88 1) | nc | — |
| 72 (C85 12) | nc | — |
| 11 (C88 16) | +14V Out (VVT) | VVT Solenoid - Inlet |
| 12 (C88 15) | Aux 1 | VVT solenoid - Inlet |
| 73 (C86 8) | nc | — |
| 13 (C88 14) | nc | Starter Signal (Auto) |
| 74 (C86 7) | nc | — |
| 14 (C88 13) | DI 9 | Starter Signal (Manual) |
| 75 (C86 6) | nc | — |
| 15 (C88 12) | nc | — |
| 76 (C86 5) | Aux 3 | AC Clutch |
| 16 (C88 11) | nc | — |
| 77 (C86 4) | nc | — |
| 17 (C88 26) | EVG | +5V or Gnd (Jumper) |
| 78 (C86 3) | nc | — |
| 18 (C88 25) | Ground | — |
| 79 (C86 2) | nc | — |
| 19 (C88 24) | Ignition 1 | Ignition |
| 80 (C86 1) | nc | — |
| 20 (C88 23) | Aux 5 | ISC Stepper |
| 81 (C86 13) | nc | — |
| 21 (C88 22) | Aux 7 | ISC Stepper |
| 82 (C86 12) | DI 7 | Vehicle Speed (From Dash) |
| 22 (C88 21) | Aux 6 | ISC Stepper |
| 83 (C86 11) | nc | — |
| 23 (C88 20) | Aux 8 | ISC Stepper |
| 84 (C86 10) | nc | — |
| 24 (C88 19) | nc | — |
| 85 (C86 9) | DI 5 | Ignition Switch |
| 25 (C88 18) | nc | — |
| 86 (C86 21) | nc | — |
| 26 (C88 17) | nc | — |
| 87 (C86 20) | DI 6 | AC Request |
| 27 (C88 34) | Ground | — |
| 88 (C86 19) | nc | — |
| 28 (C88 33) | Ground | — |
| 89 (C86 18) | nc | — |
| 29 (C88 32) | Ignition 4 (Aux)* | Spare |
| 90 (C86 17) | nc | — |
| 30 (C88 31) | nc | — |
| 91 (C86 16) | nc | — |
| 31 (C88 30) | Knock 1 | Knock |
| 92 (C86 15) | nc | — |
| 32 (C88 29) | Knock 2 | Knock |
| 93 (C86 14) | nc (+12V constant) | — |
| 33 (C88 28) | nc | — |
| 94 (C86 28) | nc | — |
| 34 (C88 27) | nc | — |
| 95 (C86 27) | nc | — |
| 96 (C86 26) | THWO | Controlled by CAN 2 |
| 35 (C84 6) | Ground (NE-) | — |
| 97 (C86 25) | nc | — |
| 36 (C84 5) | Trig 1 | Trig 1 (NE+) |
| 98 (C86 24) | nc | — |
| 37 (C84 4) | nc | — |
| 99 (C86 23) | nc (+14V Main Relay) | — |
| 38 (C84 3) | nc | — |
| 100 (C86 22) | +14V (Main Relay) | ECU Power |
| 39 (C84 2) | Ignition 6 (Aux)* | Spare |
| 40 (C84 1) | +5V Out | — |
| 41 (C84 11) | Ignition 5 (Aux)* | Spare |
| 42 (C84 10) | Trig 2 | Trig 2 (VVT) |
| 43 (C84 9) | nc | — |
| 44 (C84 8) | An Volt 6 | MAF Signal |
| 45 (C84 7) | An Volt 3 | TPS (Main) |
| 46 (C84 17) | Ignition 2 | Ignition |
| 47 (C84 16) | Ignition 3 | Ignition |
| 48 (C84 15) | nc | — |
| 49 (C84 14) | nc | — |
| 50 (C84 13) | nc | — |
| 51 (C84 12) | nc | — |
| 52 (C84 22) | Ground | — |
| 53 (C84 21) | An Temp 3 | MAF IAT |
| 54 (C84 20) | An Temp 1 | ECT |
| 55 (C84 19) | nc | — |
| 56 (C84 18) | nc | — |
| 57 (C85 4) | Aux 14 | Fuel Pump Speed |
| 58 (C85 3) | Ignition 8 | CE Light |
| 59 (C85 2) | Aux 16 (Main Relay) | ECU Hold Power |
| 60 (C85 1) | nc | — |
| 61 (C85 7) | nc | — |
| 62 (C85 6) | nc | — |
Expansion connector
| Position | Link ECU channel | Function |
|---|---|---|
| Expansion 1 | Ground (Signal) | — |
| Expansion 2 | An Volt 4 | — |
| Expansion 3 | An Temp 2 | — |
| Expansion 4 | +5V Out | — |
| Expansion 5 | An Volt 5 | — |
| Expansion 6 | DI 3 | — |
| Expansion 7 | DI 4 | — |
| Expansion 8 | Injector 8 (Aux) | — |
| Expansion 9 | An Temp 4 | — |
| Expansion 10 | DI 1 | — |
| Expansion 11 | DI 2 | — |
| Expansion 12 | Ignition 4 (Aux) | — |
| Expansion 13 | Ignition 5 (Aux) | — |
| Expansion 14 | Ignition 6 (Aux) | — |
| Expansion 15 | An Volt 1 | — |
| Expansion 16 | An Volt 2 | — |
Electronic-throttle connector
| Position | Link ECU channel | Function |
|---|---|---|
| Ethrottle 1 | Ground (Signal) | — |
| Ethrottle 2 | +5V Out | — |
| Ethrottle 3 | An Volt 10 | — |
| Ethrottle 4 | An Volt 9 | — |
| Ethrottle 5 | An Volt 8 | — |
| Ethrottle 6 | An Volt 7 | — |
| Ethrottle 7 | Aux 10 | — |
| Ethrottle 8 | Aux 9 | — |
MAF sensor: JZS161 2JZGE before 07/2000 (Also JZS161 2JZGTE & JZA80 2JZGTE VVTi)
The guide labels this as JZX100 MAF information but names these additional Toyota applications. Confirm the actual sensor configuration; the manufacturer warns that at least two five-wire arrangements exist.
| Pin | Symbol | Function |
|---|---|---|
| 1 | THA | Air Temperature Sensor |
| 2 | E2 | Sensor Ground (Air Temperature Sensor) |
| 3 | EVG | Mass Airflow Sensor Ground |
| 4 | +B | EFI Main Relay Switched Power |
| 5 | VG | Engine Airflow |
MAF sensor: JZS161 2JZGE after 07/2000 (Also JZS171 1JZGTE)
The guide labels this as JZX100 MAF information but names these additional Toyota applications. Confirm the actual sensor configuration; the manufacturer warns that at least two five-wire arrangements exist.
| Pin | Symbol | Function |
|---|---|---|
| 1 | +B | EFI Main Relay Switched Power |
| 2 | EVG | Mass Airflow Sensor Ground |
| 3 | VG | Engine Airflow |
| 4 | THA | Air Temperature Sensor |
| 5 | E2 | Sensor Ground (Air Temperature Sensor) |
RS232 connector
| Pin | Function | Wire colour |
|---|---|---|
| 1 | Comms GND | Brown |
| 2 | nc | Green |
| 3 | nc | White |
| 4 | RS232-RX | Grey |
| 5 | RS232-TX | Yellow |