Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota Supra is a V Series plug-in ECU documented for Toyota Supra 1992–1997 2JZ-GTE. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide labels the pinout Toyota Supra 92–97. It lists both B71 and B72 as Inj 7; confirm that repeated assignment with Vi-PEC before wiring.

Main ECU connector: documented positions

PositionECU functionA1DI 2B43An Volt 5A2DI 1B44An Temp 1A4DI 6B45An Temp 2A6Ign 7B47An Volt 4A15DI 4B48An Volt 3A16Aux 1B49Knock 2A22Aux 2B50Knock 1A23Aux 3B52Ign 6A34DI 3B53Ign 5B15Inj 6B54Ign 4B16Inj 5B55Ign 3B17Inj 4B56Ign 2B18Inj 3B57Ign 1B19Inj 2B60Aux 4B20Inj 1B62An Volt 1B25Trig 2B65Sensor GNDB27Trig 1B66An Volt 2B32Aux 8B71Inj 7B33Aux 6B72Inj 7B34Aux 7B73Ign 8B35Aux 5B74Aux 10B41+5 Volt outB76DI5

Expansion connector functions

The guide lists sensor ground, low-current +5 V, An Volt 6 and 7, An Temp 3 and 4, and DI 7 and 8 on the expansion connector, without individual cavity numbers. Do not infer their order.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Vi-PEC V Series Toyota Supra
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota Supra is a V Series plug-in ECU documented for Toyota Supra 1992–1997 2JZ-GTE. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide labels the pinout Toyota Supra 92–97. It lists both B71 and B72 as Inj 7; confirm that repeated assignment with Vi-PEC before wiring.

Main ECU connector: documented positions

PositionECU function
A1DI 2
B43An Volt 5
A2DI 1
B44An Temp 1
A4DI 6
B45An Temp 2
A6Ign 7
B47An Volt 4
A15DI 4
B48An Volt 3
A16Aux 1
B49Knock 2
A22Aux 2
B50Knock 1
A23Aux 3
B52Ign 6
A34DI 3
B53Ign 5
B15Inj 6
B54Ign 4
B16Inj 5
B55Ign 3
B17Inj 4
B56Ign 2
B18Inj 3
B57Ign 1
B19Inj 2
B60Aux 4
B20Inj 1
B62An Volt 1
B25Trig 2
B65Sensor GND
B27Trig 1
B66An Volt 2
B32Aux 8
B71Inj 7
B33Aux 6
B72Inj 7
B34Aux 7
B73Ign 8
B35Aux 5
B74Aux 10
B41+5 Volt out
B76DI5

Expansion connector functions

The guide lists sensor ground, low-current +5 V, An Volt 6 and 7, An Temp 3 and 4, and DI 7 and 8 on the expansion connector, without individual cavity numbers. Do not infer their order.

Revision 3: Vi-PEC V Series Toyota Supra
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota Supra is a V Series plug-in ECU documented for Toyota Supra 1992–1997 2JZ-GTE. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide labels the pinout Toyota Supra 92–97. It lists both B71 and B72 as Inj 7; confirm that repeated assignment with Vi-PEC before wiring.

Main ECU connector: documented positions

PositionECU function
A1DI 2
B43An Volt 5
A2DI 1
B44An Temp 1
A4DI 6
B45An Temp 2
A6Ign 7
B47An Volt 4
A15DI 4
B48An Volt 3
A16Aux 1
B49Knock 2
A22Aux 2
B50Knock 1
A23Aux 3
B52Ign 6
A34DI 3
B53Ign 5
B15Inj 6
B54Ign 4
B16Inj 5
B55Ign 3
B17Inj 4
B56Ign 2
B18Inj 3
B57Ign 1
B19Inj 2
B60Aux 4
B20Inj 1
B62An Volt 1
B25Trig 2
B65Sensor GND
B27Trig 1
B66An Volt 2
B32Aux 8
B71Inj 7
B33Aux 6
B72Inj 7
B34Aux 7
B73Ign 8
B35Aux 5
B74Aux 10
B41+5 Volt out
B76DI5

Expansion connector functions

The guide lists sensor ground, low-current +5 V, An Volt 6 and 7, An Temp 3 and 4, and DI 7 and 8 on the expansion connector, without individual cavity numbers. Do not infer their order.