Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota ST185 is a V Series plug-in ECU documented for Toyota MR2 and Celica ST185 applications as listed by Link. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 19, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide lists this schedule for Celica ST185 and MR2 Rev1. It lists An Volt 4 at pins 34 and 37 and marks expansion position 4 with an unexplained asterisk; check the actual board and harness.

Main ECU connector: documented positions

PositionECU function2Injection 151DI13Injection 252DI25Aux 153DI36Aux - Inj 656Aux 48Aux 357Aux 813Trigger 163Aux 615Injection 371+14V16Injection 446Ground17Aux - Inj 534AnVolt 418Aux 220Ign 122Aux 523Aux 725Trigger 233AnVolt 135AnTemp 136AnTemp 237AnVolt 438+5V42AnVolt 344AnVolt 245AnTemp 3

Other connections

PositionECU functionExpansion 1DI4Expansion 2DI5Expansion 3DI6Expansion 4AnVolt 4*Expansion 5AnVolt 5Expansion 6AnVolt 6

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Vi-PEC V Series Toyota ST185
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota ST185 is a V Series plug-in ECU documented for Toyota MR2 and Celica ST185 applications as listed by Link. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 19, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide lists this schedule for Celica ST185 and MR2 Rev1. It lists An Volt 4 at pins 34 and 37 and marks expansion position 4 with an unexplained asterisk; check the actual board and harness.

Main ECU connector: documented positions

PositionECU function
2Injection 1
51DI1
3Injection 2
52DI2
5Aux 1
53DI3
6Aux - Inj 6
56Aux 4
8Aux 3
57Aux 8
13Trigger 1
63Aux 6
15Injection 3
71+14V
16Injection 4
46Ground
17Aux - Inj 5
34AnVolt 4
18Aux 2
20Ign 1
22Aux 5
23Aux 7
25Trigger 2
33AnVolt 1
35AnTemp 1
36AnTemp 2
37AnVolt 4
38+5V
42AnVolt 3
44AnVolt 2
45AnTemp 3

Other connections

PositionECU function
Expansion 1DI4
Expansion 2DI5
Expansion 3DI6
Expansion 4AnVolt 4*
Expansion 5AnVolt 5
Expansion 6AnVolt 6
Revision 3: Vi-PEC V Series Toyota ST185
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota ST185 is a V Series plug-in ECU documented for Toyota MR2 and Celica ST185 applications as listed by Link. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 19, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide lists this schedule for Celica ST185 and MR2 Rev1. It lists An Volt 4 at pins 34 and 37 and marks expansion position 4 with an unexplained asterisk; check the actual board and harness.

Main ECU connector: documented positions

PositionECU function
2Injection 1
51DI1
3Injection 2
52DI2
5Aux 1
53DI3
6Aux - Inj 6
56Aux 4
8Aux 3
57Aux 8
13Trigger 1
63Aux 6
15Injection 3
71+14V
16Injection 4
46Ground
17Aux - Inj 5
34AnVolt 4
18Aux 2
20Ign 1
22Aux 5
23Aux 7
25Trigger 2
33AnVolt 1
35AnTemp 1
36AnTemp 2
37AnVolt 4
38+5V
42AnVolt 3
44AnVolt 2
45AnTemp 3

Other connections

PositionECU function
Expansion 1DI4
Expansion 2DI5
Expansion 3DI6
Expansion 4AnVolt 4*
Expansion 5AnVolt 5
Expansion 6AnVolt 6