Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Subaru V7-9 is a V Series plug-in ECU documented for Subaru WRX 2001–2007. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide distinguishes WRX and STI options for DI 3 and lists Aux 7 at both C-15 and C-16. Confirm the vehicle option and loom.

Main ECU connector: documented positions

PositionECU functionA-1DI 5D-11Aux – Inj 6A-2DI 3 (STI Option)D-14An Temp 3A-6DI3 (WRX Option)D-15Aux 5A-16DI 6D-17Aux – Inj 5B-7An Volt 3D-24Aux 6B-8An Volt 1D-27Aux – Inj 7B-12DI 4D-28Aux – Inj 8B-17An Volt 4E-2DI 2B-18An Temp 2E-9DI 1B-24An Volt 5E-12Aux 2B-27An Temp 1E-13An Volt 2C-4Injection 4E-16Aux 1C-5Injection 3E-5GroundC-6Injection 2E-4+14V Main RelayC-9Aux 4C-10Aux 3C-13Aux 8C-15Aux 7C-16Aux 7C-21Ignition 4C-22Ignition 3C-23Ignition 2C-24Ignition 1D-1Injection 1

Other connections

PositionECU functionExpansion 1Signal GroundExpansion 2+5V OutExpansion 3N/CExpansion 4N/CExpansion 5An Volt 6Expansion 6N/CExpansion 7N/CExpansion 8N/C

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Vi-PEC V Series Subaru V7-9
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Subaru V7-9 is a V Series plug-in ECU documented for Subaru WRX 2001–2007. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide distinguishes WRX and STI options for DI 3 and lists Aux 7 at both C-15 and C-16. Confirm the vehicle option and loom.

Main ECU connector: documented positions

PositionECU function
A-1DI 5
D-11Aux – Inj 6
A-2DI 3 (STI Option)
D-14An Temp 3
A-6DI3 (WRX Option)
D-15Aux 5
A-16DI 6
D-17Aux – Inj 5
B-7An Volt 3
D-24Aux 6
B-8An Volt 1
D-27Aux – Inj 7
B-12DI 4
D-28Aux – Inj 8
B-17An Volt 4
E-2DI 2
B-18An Temp 2
E-9DI 1
B-24An Volt 5
E-12Aux 2
B-27An Temp 1
E-13An Volt 2
C-4Injection 4
E-16Aux 1
C-5Injection 3
E-5Ground
C-6Injection 2
E-4+14V Main Relay
C-9Aux 4
C-10Aux 3
C-13Aux 8
C-15Aux 7
C-16Aux 7
C-21Ignition 4
C-22Ignition 3
C-23Ignition 2
C-24Ignition 1
D-1Injection 1

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3N/C
Expansion 4N/C
Expansion 5An Volt 6
Expansion 6N/C
Expansion 7N/C
Expansion 8N/C
Revision 3: Vi-PEC V Series Subaru V7-9
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Subaru V7-9 is a V Series plug-in ECU documented for Subaru WRX 2001–2007. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide distinguishes WRX and STI options for DI 3 and lists Aux 7 at both C-15 and C-16. Confirm the vehicle option and loom.

Main ECU connector: documented positions

PositionECU function
A-1DI 5
D-11Aux – Inj 6
A-2DI 3 (STI Option)
D-14An Temp 3
A-6DI3 (WRX Option)
D-15Aux 5
A-16DI 6
D-17Aux – Inj 5
B-7An Volt 3
D-24Aux 6
B-8An Volt 1
D-27Aux – Inj 7
B-12DI 4
D-28Aux – Inj 8
B-17An Volt 4
E-2DI 2
B-18An Temp 2
E-9DI 1
B-24An Volt 5
E-12Aux 2
B-27An Temp 1
E-13An Volt 2
C-4Injection 4
E-16Aux 1
C-5Injection 3
E-5Ground
C-6Injection 2
E-4+14V Main Relay
C-9Aux 4
C-10Aux 3
C-13Aux 8
C-15Aux 7
C-16Aux 7
C-21Ignition 4
C-22Ignition 3
C-23Ignition 2
C-24Ignition 1
D-1Injection 1

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3N/C
Expansion 4N/C
Expansion 5An Volt 6
Expansion 6N/C
Expansion 7N/C
Expansion 8N/C