Removed text is struck through; added text is highlighted.
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.
Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.
Installation and pin functions
Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.
Programming and support
Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.
Identification limits
This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.
Manufacturer pinout tables
All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.
Open each version to inspect formatting, tables and photographs.
Revision 3: Vi-PEC V Series Nissan R34 GTTVi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.
Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.
Installation and pin functions
Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.
Programming and support
Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.
Identification limits
This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.
Manufacturer pinout tables
All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.
Main ECU connector: documented positions
Position
ECU function
101
Injector 1
21
DI 3
103
Injector 3
23
An Volt 4
104
Aux 1
26
DI 1
105
Injector 2
29
DI 4
106
Aux 1
44/45
Trig 2
107
Aux 5
46
Trig 1
110
Injector 5
47
An Volt 3
111
Aux 5
50
An Volt 2
112
Injector 6
54
An Volt 1
114
Injector 4
56
An Temp 1
117
Aux 6
62
Knock 2
118
Aux 7
63
Knock 1
124
Ground
72
+14V (Main Relay)
1
Ignition 1
2
Ignition 5
3
Ignition 3
5
Aux 3
7
Ignition 6
8
Ignition 2
9
Ignition 4
11
Aux 4
13
Aux 2
14
Aux – Inj 7
17
Aux 8
20
DI 2
Other connections
Position
ECU function
Expansion 1
Signal Ground
Expansion 2
+5V Out
Expansion 3
DI 5
Expansion 4
DI 6
Expansion 5
An Volt 5
Expansion 6
An Volt 6
Expansion 7
An Temp 2
Expansion 8
An Temp 3
Revision 3: Vi-PEC V Series Nissan R34 GTTVi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.
Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.
Installation and pin functions
Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.
Programming and support
Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.
Identification limits
This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.
Manufacturer pinout tables
All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.