Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Nissan GTS GTR is a V Series plug-in ECU documented for Nissan R32–R33 GTS and R32–R34 GT-R listed by Link. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 23, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline GTS/GTR and lists Aux 1 at both pins 106 and 113; confirm the vehicle and loom.

Main ECU connector: documented positions

PositionECU function
101Injector 1
29An Volt 6
103Injector 3
32Aux 7
104Aux 2
35An Volt 5
105Injector 2
36An Temp 2
106Aux 1
38An Volt 3
110Injector 5
43DI 2
112Injector 6
44DI 8
113Aux 1
46DI 4
114Injector 4
53DI 3
54DI 7
1Ignition 1
55An Volt 9
2Ignition 5
50Ground
3Ignition 3
49+14V ECCS Relay
4Aux – Inj 7
6Aux – Inj 8
7Aux 4
9Aux 3
11Ignition 6
12Ignition 2
13Ignition 4
18Aux 6
19DI 1
23Knock 1
24Knock 2
25Aux 8
27An Volt 4
28An Temp 1

Other connections

PositionECU function
Internal MAPAn Volt 1
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3DI 5
Expansion 4DI 6
Expansion 5An Volt 8
Expansion 6An Volt 2
Expansion 7An Temp 3
Expansion 8An Temp 4