Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iMini for the Mini R53. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC iMini is a iSeries plug-in ECU documented for BMW Mini R53. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named iSeries plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link identifies PCLink G4+ for iSeries hardware. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer main-connector pinout

All positions listed in the i-Series application installation guide, page 21. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide distinguishes PCB V1.0 and V1.1. In particular, pins 63–66 and pins 88/95 differ by board revision; confirm the actual board before wiring. The expansion connector is described as Aux 1, DI 8/9, An Temp 3/4, An Volt 10/11, +5 V and sensor ground, without cavity numbering in that description.

PositionPCB V1.0PCB V1.11Not connectedIgn 354DI 2DI 22Not connectedIgn 455Trig 1Trig 13Ign 1 (Internal Ignitor)Ign 1 (Internal Ignitor)63Aux 9Aux 104Ign 2 (Internal Ignitor)Ign 2 (Internal Ignitor)64Aux 9Aux 105Inj 5Inj 565Aux 10Aux 98Knock 1Knock 166Aux 10Aux 99An Volt 7An Volt 785DI 3DI 310An Volt 5An Volt 588Ign 3Ign 611An Volt 6An Volt 690An Volt 9An Volt 919Inj 4Inj 493DI 10DI 1020Inj 2Inj 294Aux 6Aux 621Inj 1Inj 195Ign 4Ign 722Inj 3Inj 396Aux 5Aux 524Aux 3Aux 398DI 4DI 425An Temp 3An Temp 399DI 5DI 526An Temp 1An Temp 1101DI 6DI 627An Temp 2An Temp 2105Ign 5Ign 529An Volt 2An Volt 2107An Volt 4An Volt 431An Volt 1An Volt 1108An Volt 3An Volt 342Aux 2Aux 2109An Volt 8An Volt 843Inj 6Inj 6110CANH2CANH252DI 1DI 1111CANL2CANL253Trig 2Trig 2113DI7DI7

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Vi-PEC iMini

Vi-PEC iMini is a iSeries plug-in ECU documented for BMW Mini R53. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named iSeries plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link identifies PCLink G4+ for iSeries hardware. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer main-connector pinout

All positions listed in the i-Series application installation guide, page 21. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide distinguishes PCB V1.0 and V1.1. In particular, pins 63–66 and pins 88/95 differ by board revision; confirm the actual board before wiring. The expansion connector is described as Aux 1, DI 8/9, An Temp 3/4, An Volt 10/11, +5 V and sensor ground, without cavity numbering in that description.

PositionPCB V1.0PCB V1.1
1Not connectedIgn 3
54DI 2DI 2
2Not connectedIgn 4
55Trig 1Trig 1
3Ign 1 (Internal Ignitor)Ign 1 (Internal Ignitor)
63Aux 9Aux 10
4Ign 2 (Internal Ignitor)Ign 2 (Internal Ignitor)
64Aux 9Aux 10
5Inj 5Inj 5
65Aux 10Aux 9
8Knock 1Knock 1
66Aux 10Aux 9
9An Volt 7An Volt 7
85DI 3DI 3
10An Volt 5An Volt 5
88Ign 3Ign 6
11An Volt 6An Volt 6
90An Volt 9An Volt 9
19Inj 4Inj 4
93DI 10DI 10
20Inj 2Inj 2
94Aux 6Aux 6
21Inj 1Inj 1
95Ign 4Ign 7
22Inj 3Inj 3
96Aux 5Aux 5
24Aux 3Aux 3
98DI 4DI 4
25An Temp 3An Temp 3
99DI 5DI 5
26An Temp 1An Temp 1
101DI 6DI 6
27An Temp 2An Temp 2
105Ign 5Ign 5
29An Volt 2An Volt 2
107An Volt 4An Volt 4
31An Volt 1An Volt 1
108An Volt 3An Volt 3
42Aux 2Aux 2
109An Volt 8An Volt 8
43Inj 6Inj 6
110CANH2CANH2
52DI 1DI 1
111CANL2CANL2
53Trig 2Trig 2
113DI7DI7
Revision 3: Vi-PEC iMini
Vi-PEC iMini R53 ECU
Vi-PEC iMini for the Mini R53. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC iMini is a iSeries plug-in ECU documented for BMW Mini R53. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named iSeries plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link identifies PCLink G4+ for iSeries hardware. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer main-connector pinout

All positions listed in the i-Series application installation guide, page 21. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide distinguishes PCB V1.0 and V1.1. In particular, pins 63–66 and pins 88/95 differ by board revision; confirm the actual board before wiring. The expansion connector is described as Aux 1, DI 8/9, An Temp 3/4, An Volt 10/11, +5 V and sensor ground, without cavity numbering in that description.

PositionPCB V1.0PCB V1.1
1Not connectedIgn 3
54DI 2DI 2
2Not connectedIgn 4
55Trig 1Trig 1
3Ign 1 (Internal Ignitor)Ign 1 (Internal Ignitor)
63Aux 9Aux 10
4Ign 2 (Internal Ignitor)Ign 2 (Internal Ignitor)
64Aux 9Aux 10
5Inj 5Inj 5
65Aux 10Aux 9
8Knock 1Knock 1
66Aux 10Aux 9
9An Volt 7An Volt 7
85DI 3DI 3
10An Volt 5An Volt 5
88Ign 3Ign 6
11An Volt 6An Volt 6
90An Volt 9An Volt 9
19Inj 4Inj 4
93DI 10DI 10
20Inj 2Inj 2
94Aux 6Aux 6
21Inj 1Inj 1
95Ign 4Ign 7
22Inj 3Inj 3
96Aux 5Aux 5
24Aux 3Aux 3
98DI 4DI 4
25An Temp 3An Temp 3
99DI 5DI 5
26An Temp 1An Temp 1
101DI 6DI 6
27An Temp 2An Temp 2
105Ign 5Ign 5
29An Volt 2An Volt 2
107An Volt 4An Volt 4
31An Volt 1An Volt 1
108An Volt 3An Volt 3
42Aux 2Aux 2
109An Volt 8An Volt 8
43Inj 6Inj 6
110CANH2CANH2
52DI 1DI 1
111CANL2CANL2
53Trig 2Trig 2
113DI7DI7