Removed text is struck through; added text is highlighted.
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.
Vi-PEC V Series Toyota Supra is a V Series plug-in ECU documented for Toyota Supra 1992–1997 2JZ-GTE. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.
Installation and pin functions
Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.
Programming and support
Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.
Identification limits
This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.
Manufacturer pinout tables
All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide labels the pinout Toyota Supra 92–97. It lists both B71 and B72 as Inj 7; confirm that repeated assignment with Vi-PEC before wiring.
Main ECU connector: documented positions
PositionECU functionA1DI 2B43An Volt 5A2DI 1B44An Temp 1A4DI 6B45An Temp 2A6Ign 7B47An Volt 4A15DI 4B48An Volt 3A16Aux 1B49Knock 2A22Aux 2B50Knock 1A23Aux 3B52Ign 6A34DI 3B53Ign 5B15Inj 6B54Ign 4B16Inj 5B55Ign 3B17Inj 4B56Ign 2B18Inj 3B57Ign 1B19Inj 2B60Aux 4B20Inj 1B62An Volt 1B25Trig 2B65Sensor GNDB27Trig 1B66An Volt 2B32Aux 8B71Inj 7B33Aux 6B72Inj 7B34Aux 7B73Ign 8B35Aux 5B74Aux 10B41+5 Volt outB76DI5
Expansion connector functions
The guide lists sensor ground, low-current +5 V, An Volt 6 and 7, An Temp 3 and 4, and DI 7 and 8 on the expansion connector, without individual cavity numbers. Do not infer their order.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Vi-PEC V Series Toyota Supra
Vi-PEC V Series Toyota Supra is a V Series plug-in ECU documented for Toyota Supra 1992–1997 2JZ-GTE. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.
Installation and pin functions
Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.
Programming and support
Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.
Identification limits
This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.
Manufacturer pinout tables
All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide labels the pinout Toyota Supra 92–97. It lists both B71 and B72 as Inj 7; confirm that repeated assignment with Vi-PEC before wiring.
Main ECU connector: documented positions
Position
ECU function
A1
DI 2
B43
An Volt 5
A2
DI 1
B44
An Temp 1
A4
DI 6
B45
An Temp 2
A6
Ign 7
B47
An Volt 4
A15
DI 4
B48
An Volt 3
A16
Aux 1
B49
Knock 2
A22
Aux 2
B50
Knock 1
A23
Aux 3
B52
Ign 6
A34
DI 3
B53
Ign 5
B15
Inj 6
B54
Ign 4
B16
Inj 5
B55
Ign 3
B17
Inj 4
B56
Ign 2
B18
Inj 3
B57
Ign 1
B19
Inj 2
B60
Aux 4
B20
Inj 1
B62
An Volt 1
B25
Trig 2
B65
Sensor GND
B27
Trig 1
B66
An Volt 2
B32
Aux 8
B71
Inj 7
B33
Aux 6
B72
Inj 7
B34
Aux 7
B73
Ign 8
B35
Aux 5
B74
Aux 10
B41
+5 Volt out
B76
DI5
Expansion connector functions
The guide lists sensor ground, low-current +5 V, An Volt 6 and 7, An Temp 3 and 4, and DI 7 and 8 on the expansion connector, without individual cavity numbers. Do not infer their order.
Revision 3: Vi-PEC V Series Toyota SupraVi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.
Vi-PEC V Series Toyota Supra is a V Series plug-in ECU documented for Toyota Supra 1992–1997 2JZ-GTE. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.
Installation and pin functions
Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.
Programming and support
Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.
Identification limits
This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.
Manufacturer pinout tables
All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide labels the pinout Toyota Supra 92–97. It lists both B71 and B72 as Inj 7; confirm that repeated assignment with Vi-PEC before wiring.
Main ECU connector: documented positions
Position
ECU function
A1
DI 2
B43
An Volt 5
A2
DI 1
B44
An Temp 1
A4
DI 6
B45
An Temp 2
A6
Ign 7
B47
An Volt 4
A15
DI 4
B48
An Volt 3
A16
Aux 1
B49
Knock 2
A22
Aux 2
B50
Knock 1
A23
Aux 3
B52
Ign 6
A34
DI 3
B53
Ign 5
B15
Inj 6
B54
Ign 4
B16
Inj 5
B55
Ign 3
B17
Inj 4
B56
Ign 2
B18
Inj 3
B57
Ign 1
B19
Inj 2
B60
Aux 4
B20
Inj 1
B62
An Volt 1
B25
Trig 2
B65
Sensor GND
B27
Trig 1
B66
An Volt 2
B32
Aux 8
B71
Inj 7
B33
Aux 6
B72
Inj 7
B34
Aux 7
B73
Ign 8
B35
Aux 5
B74
Aux 10
B41
+5 Volt out
B76
DI5
Expansion connector functions
The guide lists sensor ground, low-current +5 V, An Volt 6 and 7, An Temp 3 and 4, and DI 7 and 8 on the expansion connector, without individual cavity numbers. Do not infer their order.