Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Vi-PEC V Series Honda Civic 1996-1999 is a V Series plug-in ECU documented for Honda Civic 1996–1999 OBD2 as identified by the Link manual index. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The source lists Aux–Inj 5 at both A-5 and A-6. Confirm the loom and output use.

Main ECU connector: documented positions

PositionECU function
A-1Injection 4
D-2An Temp 2
A-2Injection 3
D-3An Volt 1
A-3Injection 2
D-7An Volt 3
A-4Injection 1
D-8An Temp 1
A-5Aux – Inj 5
D-14An Volt 2
A-6Aux – Inj 5
A-11+14V Main Relay
A-7Aux 5
A-10Ground
A-8Aux 6
A-12Aux 1
A-16Aux 2
A-17Aux 3
A-18Aux 4
A-20Ignition 1
A-21Ignition 2
A-27Aux – Inj 6
A-31Ignition 3
A-32Ignition 4
C-5DI 1
C-6DI 2
C-15DI 5
C-16DI 6
C-18DI 3
C-29DI 4
D-1An Volt 4

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3An Volt 5
Expansion 4An Volt 6
Expansion 5Aux 7
Expansion 6Aux 8
Expansion 7N/C
Expansion 8An Temp 3