Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
WABCO

ABS and traction systems directory · WABCO ABS units

WABCO's identification literature distinguishes D version pneumatic ABS from the E version, and shows Basic, cab-mounted and frame-mounted D ECUs. The system is documented for trucks, tractors and buses. The pneumatic designation matters: a separately documented D version hydraulic ABS also exists.

Documented applications

WABCO directs technicians to maintenance manual 30 for D pneumatic ABS. Identify ECU part number, sensor/modulator configuration and the vehicle's brake type before selecting documentation.

Identification and service

Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.

Sources