Page organisation in this revision
- Page type
- Technical article
- Subject
- ABS / DSC
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Mando
Changes from revision 1 to revision 3
Removed text is struck through; added text is highlighted.
ABS and traction systems directory · Mando ABS units
MGH-20 is identified as a series-production Mando ABS in an SAE technical paper about the hydraulic braking system. The paper's family designation does not establish a particular vehicle application or part-number interchange.
Documented applications
Mando identifies MGH-20 as a series-production ABS family. One T11 application is described below; exact part-number interchange still requires vehicle-specific verification.The research source establishes the MGH-20 name and ABS context; a verified vehicle-specific application and detailed variant identification remain to be added.Identification and service
Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.
Vehicle-specific exampleThe Chery Tiggo T11 service manual describes an MGH-20 supplied by Mando on the T11, with four-channel control of the individual wheel brakes. The cited manual does not establish that every Tiggo T11, market or year has this unit; identify the fitted actuator and use the correct vehicle documentation.The manual includes a system wiring schematic in its chassis section, printed page 42, as well as diagnosis and HECU replacement and bleeding guidance. The schematic should be checked against the exact vehicle and controller before using its pin numbers. Source: T11 service manual, chassis system, ABS section (third-party hosted copy).Sources
Mando MGH hydraulic system design paper, SAE 2003-01-0253
Page organisation changed
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Mando MGH-20 ABS
ABS and traction systems directory · Mando ABS units
MGH-20 is identified as a series-production Mando ABS in an SAE technical paper about the hydraulic braking system. The paper's family designation does not establish a particular vehicle application or part-number interchange.
Documented applications
The research source establishes the MGH-20 name and ABS context; a verified vehicle-specific application and detailed variant identification remain to be added.
Identification and service
Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.
Sources
Revision 3: Mando MGH-20 ABS
ABS and traction systems directory · Mando ABS units
MGH-20 is identified as a series-production Mando ABS in an SAE technical paper about the hydraulic braking system. The paper's family designation does not establish a particular vehicle application or part-number interchange.
Documented applications
Mando identifies MGH-20 as a series-production ABS family. One T11 application is described below; exact part-number interchange still requires vehicle-specific verification.
Identification and service
Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.
Vehicle-specific example
The Chery Tiggo T11 service manual describes an MGH-20 supplied by Mando on the T11, with four-channel control of the individual wheel brakes. The cited manual does not establish that every Tiggo T11, market or year has this unit; identify the fitted actuator and use the correct vehicle documentation.
The manual includes a system wiring schematic in its chassis section, printed page 42, as well as diagnosis and HECU replacement and bleeding guidance. The schematic should be checked against the exact vehicle and controller before using its pin numbers. Source: T11 service manual, chassis system, ABS section (third-party hosted copy).
Sources